Transducer High-efficiency 200 mm (8 inch) dual-cone driver with 25 mm (1 in) diameter voice coil, Kapton coil former, and high-temperature voice coil wire.
(-10 dB) 100 Hz – 16 kHz
Nominal Sensitivity 96 dB
Nominal Coverage Angle 100° conical coverage (ave. 1 kHz - 4 kHz)
Rated Maximum SPL 108 dB @ 1 m (3.3 ft) average, 108 dB peak (at 8Ω setting)
Nominal Impedance 8 ohms (in Direct/Thru 8Ω setting)
Transformer Taps 10 W, 5 W, 2.5 W @ 70V or 100V (plus 1.3 W @ 70V only)
High Pass 90 Hz high-pass (24 dB/oct) for 8Ω direct or any 70V or 100V tap setting
(at low-Z) 40 Watts Continuous Program Power
20 Watts Continuous Pink Noise
Input Connector Bare wire inside protected in touch-proof wiring compartment.
Tap Selector Rotary switch accessible from side of backcan
Materials Steel rear enclosure, front baffle, and perforated grille
Grille Color White
Safety Agency Suitable for use in air handling spaces certified per UL1480A, Speakers for Commercial and Professional Use; UL2043, Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products Installed in Air-Handling Spaces; NFPA90 & NFPA70; S7232/UL Listed, Signaling Speaker.
Dimensions 607 x 607 x 103 mm (23.9 x 23.9 x 4.1 in)
Net Weight 7.1 kg (15.7 lbs)
Shipping Weight 8.3kg ea; 16.5 kg per pair-pack (18.3 lbs ea; 36.4 lbs per pair-pack)
Ceiling Cutout Size No cutout required. Speaker drops into ceiling grid
Suspension / Safety-Seismic Attachment Points Two tabs on back baffle, plus 4 holes in corners