|Product family:||Concrete Waterproofing Repair Products|
|Product group:||Megamix Series|
|Date of publishing:||2019-08-15|
|Type:||Documentation (information only)|
Crystalline, Concrete Waterproofing, Waterproof Concrete, Waterproof Coating, Bentonite, Bituthene, Positive Side Waterproofing, Negative Side Waterproofing, Below Grade, Repair Mortar, Cast-In-Place Walls, Vertical Concrete Block Surface
Megamix I & II is a repairing mortar specifically for the waterproofing and resurfacing of deteriorated concrete surfaces, whereas Megamix II + Bio-San is specifically formulated for restoration of concrete damaged by microbial induced corrosion, abrasion/erosion and chemical attack.
Xypex Megamix I is a thin parge coat for the waterproofing and resurfacing of vertical masonry or concrete surfaces, as a cap coat for Xypex Concentrate, or as an architectural rendering. Megamix I is a unique blend of Portland cement, treated silica sand, fibers and proprietary chemicals. It is mixed with Xycrylic Admix to produce enhanced bond. Megamix I is applied by brush or trowel up to a thickness of 3/8 in. (10 mm).
NOTE: For patching or resurfacing deteriorated concrete, requiring a thicker parge coat, (between 3/8 in. and 2 in. or 10 mm to 50 mm), refer to the product data sheet for Xypex Megamix II.
Megamix I is available in 60 lb. (27.2 kg) pails.
Required coating thickness will vary depending on project requirements. At the recommended thickness of 1/8 in. (3.2 mm), one 60 lb. (27.2 kg) pail of Megamix I will cover 47.5 sq. ft. (4.4 m2). Megamix I may be applied as thin as 1/16 in. (1.6 mm) provided it is used as a cap coat over a coat of Xypex Concentrate. For application thickness exceeding 3/8 in. (10 mm), consult with the Technical Services Department of Xypex Chemical Corporation or your local Xypex Technical Services Representative.
Keywords: Crystalline, Concrete Waterproofing, Waterproof Concrete, Waterproof Coating, Bentonite, Bituthene, Positive Side Waterproofing, Negative Side Waterproofing, Below Grade, Repair Mortar, Cast-In-Place Walls, Vertical Concrete Block Surface
|COBie Product Data Sheet:|
The Qr code includes the static URL below and will bring you back to this page if scanned by a device like iPhone or smartphone
|BIMobject Category:||Construction Materials - Concrete|
|Uniclass 1.4 Code:||JJ|
|Uniclass 1.4 Description:||Waterproofing|
|Uniclass 2.0 Code:||PR-55-14-96|
|Uniclass 2.0 Description:||Waterproofing Concrete Admixtures|
|Uniclass 2015 Code:||Pr_20_31_03_95|
|Uniclass 2015 Description:||Waterproofing concrete admixtures|
|NBS Reference Code:||55-14-96|
|NBS Reference Description:||Waterproofing Concrete Admixtures|
|CSI MasterFormat 2014 Code:||04 01 00|
|CSI MasterFormat 2014 Title:||Maintenance of Masonry|
|OmniClass Number:||23-13 27 13 11|
|OmniClass Title:||Repair Mortars|
Click these links for more information from AEC Daily