Publique sus productos

VK190 - Standard Response Dry Concealed Pendent Sprinkler (K5.6)

The Viking Corporation

Archivados

VK190 - Standard Response Dry Concealed Pendent Sprinkler (K5.6)

Viking Standard Response Dry Concealed Pendent Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed for dry systems and preaction systems where it is necessary to prevent water or condensation from entering the drop nipple before sprinkler operation. They may also be installed in spaces subject to freezing and supplied from a wet system in an adjacent heated area. The dry concealed sprinkler is pre-assembled with a threaded adapter for installation with the domed cover that provides up to ½” (12 mm) of vertical adjustment. The push-on, thread-off cover slips on from below the ceiling to allow installation of the sprinkler prior to ceiling construction. Refer to technical data sheet for design and installation requirements.

Especificaciones

K-Factor: K5.6 (80)
Manufacturer: Viking
Page: F_092003
Part Number: 12421UA,12429UA,12381
VK Number: VK190
Additional Information: NOTICE: The product details indicated below are for general reference only and may vary based on the specific product approval and/or application. Always verify product details with the technical data sheet and consult with the Authority Having Jurisdiction (AHJ).
Max Pressure: 175 psi (12 bar)
Response Type: Standard
Occupancy Type: Extra, Light, Ordinary
Thread Size: 1" NPT (25 mm BSP)
Min Spacing: 6 ft (1,8 m)
Max Spacing: Per Standards / Listings

Especificaciones técnicas

Referenciavk190-standard-response-pendent-sprinkler-k56
Familia de productoViking Dry Barrel Sprinklers
Grupo de productosViking - Dry Pendent Domed Esc / Pendent
TipoObjeto (objeto simple)
Día de publicación2021-01-25
Número de edición1

Links

Instalación URLhttps://www.vikinggroupinc.com/vk190-dry-concealed-pendent-sprinkler-k56
Certificación de productohttps://www.vikinggroupinc.com/sites/default/files/documents/092003.pdf
Descripción técnicahttps://www.vikinggroupinc.com/sites/default/files/documents/092003.pdf

Información relacionada

Diseñado enEstados Unidos
Fabricado enEstados Unidos

Clasificación

Categoría BIMobjectProtección contraincendios - Sprinklers
Código ETIMEC011373
Nombre ETIMDry sprinkler
Nombre UNSPSCFire sprinkler heads
Código UNSPSC46191610
Código Uniclass 2015Pr_70_55_97_84
Descripción Uniclass 2015Sprinkler heads
CSI MasterFormat 2014 Code21 13 00
CSI MasterFormat 2014 TítuloFire-Suppression Sprinkler Systems
Número OmniClass23-29 33 11 11 13
Título OmniClass Dry Pendant Sprinkler Heads
CSI UniFormat II CódigoD4010
CSI UniFormat II TítuloSprinklers

Productos similares

imagen para Model 8611 Corner RiserPACK

AGF Manufacturing Model 8611 Corner RiserPACK

4.6 (17)

imagen para Model 2511T TESTanDRAIN - Single Handle Ball Valve

AGF Manufacturing Model 2511T TESTanDRAIN - Single Handle Ball Valve

imagen para Model 7700 CORRinSITE Inline Pipe Corrosion Monitor

AGF Manufacturing Model 7700 CORRinSITE Inline Pipe Corrosion Monitor

imagen para Sprinkler Pipe Ring - Central Europe HVAC

Hilti Sprinkler Pipe Ring - Central Europe HVAC

4.6 (10)

imagen para Model 8000 Commercial RiserPACK® - Prepackage Commercial Riser Assembly

AGF Manufacturing Model 8000 Commercial RiserPACK® - Prepackage Commercial Riser Assembly

4.6 (7)

imagen para Wilkins FP63 Mechanical Tees

Zurn Wilkins FP63 Mechanical Tees

4.2 (9)

Common.Footer.ValueProp.Image.AltText

Aplicación de diseño para Revit

Cargue familias directamente en su modelo de Revit con un solo clic

Obtenga un lugar para acceder a nuevos objetos más fácilmente, almacene sus familias de Revit y colabore con su equipo.

Trabaje directamente con los objetos BIM junto a Revit
2GB de almacenamiento en la nube: almacene su contenido de Revit
Obtenga el LCA de carbono incorporado (A1-A3) directamente desde Revit