PANDOMO BW Binder Matrix

For the production of quickly usable and ready to lay mineral decorative floors on an insulating layer, on a separating layer and in a composite.

Dimension-controlled binder system = almost shrinkage and stress-free hardening and drying.

Quick usability.

For indoors.

Can be walked on after only 12 hours.

Sandable after 36, depending on temperature.

The mortar is produced exclusively with a compulsory mixer.

Processing time 45 minutes
Consistent consistency even with longer mixing times
Easy distribution and application of the mortar
Range of application
Manufacture of sanded decorative floors with quick accessibility and early initial strength

in co-operation
on separate layer
as floating screed

Tekniset tiedot

Mixing ratio: in a ratio of 1: 5
25 kg PANDOMO® BW 125 kg sand, fractions 0/8
6 - 12 l of water (depending on the humidity of the sand)
Bulk Weight: approx. 1.1 kg / l
Weight of crude solution: approx. 2.1 kg / l
Material Consumption: approx. 3.3 kg of powder per m2 and cm of thickness
Operating time: (+20 ° C): approx. 45 minutes
Readiness for pedestrian loads: (+20 ° C): after about 12 hours
Compressive strength:
after 1 day approx. 20 N / mm2
after 7 days approx. 35 N / mm2
after 28 days approx. 45 N / mm2
Bending strength:
after 1 day approx. 3 N / mm2
after 7 days approx. 4.5 N / mm2
after 28 days approx. 5.5 N / mm2
Suitable for underfloor heating: yes
GHS / CLP notation: GHS 05: caustic Signal word: Danger
Designations ADR: no
EMICODE: EC 1 R PLUS - Extremely Low EmissionsPLUS
Packaging: 25 kg net bags
Storage: In a dry room in the original factory packaging approx. 12 months