Käytämme evästeitä palvelujemme tuottamiseen

Kun käytät tuotteitamme, hyväksyt evästeiden käyttömme

POLYDAN 180-40 P ELAST

Yksilöity viite: polydan_180_40_elast
Brändi: Danosa
Tuoteperhe: Bituminous Waterproofing
Tuoteryhmä: Asphalt
Leveys (mm): 10000
Korkeus (mm): 1000
Syvyys (mm): 3.5
Julkaisupäivä: 2019-03-14
Painoksen numero: 1
Tyyppi: Objekti (yksittäinen objekti)
Lataa (1)
POLYDAN 180-40 P ELAST. is a waterproofing sheet made of SBS modified bitumen mastic. Composed of a non-woven polyester felt reinforcement and covered on both sides with a polyethylene film. Tested according to the standards EN tests methods.


SCOPE:

Radon gas Control Layer

TECHNICAL DATA:

- External fire performance: No performance determined (UNE-EN 1187; UNE-EN 13501-5)
- Reaction to fire: E (UNE-EN 11925-2; UNE-EN 13501-1)
- Watertightness: Positive or Correct (UNE-EN 1928)
- Longitudinal tensile strength: 900 ± 250 N/5cm (UNE-EN 12311-1)
- Transversal tensile strength: 650 ± 250 N/5cm (UNE-EN 12311-1)
- Longitudinal elongation at break: 45 ±15 % (UNE-EN 12311-1)
- Transversal elongation at break: 45 ±15 % (UNE-EN 12311-1)
- Resistance to root penetration: Negative (UNE-EN 13948)
- Resistance to static loading: more than 20 kg (UNE-EN 12730)
- Resistance to impact: more than 1500 mm (UNE-EN 12691
- Longitudinal resistance to tearing (nail shank): No performance determined (UNE-EN 12310-1)
- Transversal resistance to tearing (nail shank): No performance determined (UNE-EN 12310-1)
- Joint strength: peel resistance: No performance determined (UNE-EN 12316-1)
- Joint strength: shear resistance: 650 ± 250 (UNE-EN 12317-1)
- Flexibility at low temperature: less than -15 ºC (UNE-EN 1109)
- Humidity resistance factor: 20.000 (UNE-EN 1931)
- Dangerous substances: No performance determined
- Flexibility at low temperature (pliability): after aging -5 ± 5 ºC (UNE-EN 1109)
- Flow resistance at elevated temperature:after aging 100 ±10 ºC (UN-EN 1110)


ADDTITIONAL TECHNICAL DATA:
- Mass per unit area (nominal): 4.0 kg/m²
- Mass per unit area (minimum): 3.85 kg/m²
- Nominal thickness: 3.5 mm
- Flow resistance at elevated temperature: more than 100 ºC (UN-EN 1110)
- Dimensional stability at elevated temperature (longitudinal): less than 0.5 % (UNE-EN 1107-1)
- Dimensional stability at elevated temperature (transversal): less than 0.5 % (UNE-EN 1107-1)
- Adhesion of granules: No performance determined (UNE-EN 12039)


PRESENTATION:

- Length: 10 m
- Width: 1 m
- Roll surface: 10 m2
- Rolls per pallet: 25 rolls
- Product Code: 141404


Materiaali pääasiassa: Asphalt
Materiaali toissijaisesti:
Suunniteltu: Spain
Valmistettu: Spain
Nettopaino (kg): 4

BIMobject-luokka: Building Materials - Waterproofing & Membranes
IFC-luokitus: Building Element Proxy
Uniclass 2015 Koodi: Pr_25_57_08_08
Uniclass 2015 Kuvaus: Bitumen sheets
CSI MasterFormat 2014 Code: 07 13 53
CSI MasterFormat 2014 Title: Elastomeric Sheet Waterproofing
KaikkiLuokat Numero: 23-13 25 17 13 15
KaikkiLuokat Otsikko: Modified Bituminous Sheet Waterproofing
CSI UniFormat II Code: A20
CSI UniFormat II Title: BASEMENT CONSTRUCTION
Tämä tuote on saatavana:
Europe
  • Spain

BIMobject SEEK Properties

Building Materials - Waterproofing & Membranes

Nimi Arvo
Application Waterproofing
Material SBS modified bitumen mastic
Membrane Type Non-woven polyester felt reinforcement
Tensile Strength Longitudinal: 900 ± 250 N/5cm ; Transversal tensile strength: 650 ± 250 N/5cm
Thickness 3.5

Kaikki BIM-objektit ovat todellisia tuotteita todellisilta valmistajilta, ja ne on vahvistettu ja hyväksytty