Industrial Control Damper - Thermally Insulated - Broken Airfoil Parallel Blade - TICD-51

Thermally Insulated Control Damper
Broken Airfoil Blade

The TICD-51 control dampe employs thermally insulated and broken aluminum airfoil blades and a rugged channel frame to eliminate the transfer of heat or cold penetration and reduce condensation. The TICD-51 damper provides extremely low leakage and exceptional air control in medium to high pressure and velocity applications. Both models comply with the IECC (International Energy Conservation Code) with a leakage rating of 3 cfm/ft 2 @ 1 in. wg. (0.015 m3 /s/m2 @ 0.25 kPa) or less.

Tekniset tiedot

Standard Construction
Frame: 4" x 1" x 0.081" (102 x 25 x 2) top/bottom and
4" x 1-1/8" x 0.081" (102 x 29 x 2) jambs, extruded aliminum channel.
Blades: 6" (152) heavy gauge, dual wall thermally insulated and broken extruded aluminum - airfoil. Parallel.
Axles: 1/2" (13) diameter plated steel hex.
Linkage: Concealed in frame.
Bearings: Synthetic.
Seals: Silicone - blade edge and jambs. Both are mechanically fastened.
Control Shaft: 1/2" x 6" (13 x 152) round drive axle with outboard shaft support bracket and beating supplied for field installation. Factory installed 3/4" (19) diameter jackshaft on all multiple section dampers more than 2 sections wide.
Minimum Size: 6" x 6.5" (152 x 165)
Maximum Size:
Single Section: 60" x 72" (1524 x 1829)
Multiple Sections: Unlimited
Ratings
Temperature: -45^oF to 212^oF (-43^oC to 100^oC)
Leakage Class: 1A and 1 (see chart on product sheet)

Tekniset tiedot

Yksilöity viiteIndustrial-Control-Damper-Thermally-Insulated-Broken-Airfoil-Parallel-Blade-TICD-51
TuoteperheHVAC
TuoteryhmäAir Control Dampers
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2024-07-16
Painoksen numero1

Linkit

Tuotteen urlhttps://www.pottorff.com/product/details/350

Luokitus

BIMobject-luokkaLVI - Kanavistot
Uniclass 2015 -koodiPr_65_65_24
Uniclass 2015 -kuvausDuct dampers
CSI MasterFormat 2014 -koodi23 33 13.13
CSI MasterFormat 2014 -nimikeVolume-Control Dampers
OmniClass-numero23-33 29 37
OmniClass-nimikeVolume Control Dampers

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret