Julkaise tuotteesi
Wind-Driven Rain Resistant Stationary Louver EME6325D
Ruskin

Wind-Driven Rain Resistant Stationary Louver EME6325D

The EME6325D is Miami Dade and Florida approved.  This 6" deep vertical louver passed the TAS-100A wind driven rain test without a damper or sloped duct at rear.  It features:

AMCA 540 (Enhanced) and AMCA 550 listed louver with the Air Movement and Control Association
Tested to the following FBC/Miami Dade County Test protocols
TAS-100A Wind Driven Rain Test
TAS-201 Large Missile Impact Test
TAS-202 Uniform Static pressure 
TAS-203 Cyclic Pressure Test
Miami DADE NOA #20-1201.04
 Approved for locations up to 33 ft. above grade for "dry" room locations.
AMCA Certified Class A 99.9% effective ratio wind driven rain performance at both 29 mph and 50 mph.
AMCA Certified Air and Water Penetration.
Aluminum clip angle installation.

Tekniset tiedot
  • The EME6325D is Miami Dade and Florida approved.  This 6" deep vertical louver passed the TAS-100A wind driven rain test without a damper or sloped duct at rear.  It features:

    • AMCA 540 (Enhanced) and AMCA 550 listed louver with the Air Movement and Control Association
    • Tested to the following FBC/Miami Dade County Test protocols
    • TAS-100A Wind Driven Rain Test
    • TAS-201 Large Missile Impact Test
    • TAS-202 Uniform Static pressure 
    • TAS-203 Cyclic Pressure Test
    • Miami DADE NOA #20-1201.04
    •  Approved for locations up to 33 ft. above grade for "dry" room locations.
    • AMCA Certified Class A 99.9% effective ratio wind driven rain performance at both 29 mph and 50 mph.
    • AMCA Certified Air and Water Penetration.
    • Aluminum clip angle installation.

Tekniset tiedot
  • Yksilöity viiteruskin-007
  • TuoteperheFixed Exterior Louvers and Grilles
  • TuoteryhmäHurricane Louvers
  • TyyppiObjekti (yksittäinen objekti)
  • Julkaisupäivä2011-12-01
  • Painoksen numero1
Luokitus
  • BIMobject-luokkaOvet - Häikäisysuojat

Alueellinen saatavuus

Pohjois-Amerikka
Yhdysvallat
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Lataa perheet suoraan Revit-malliisi yhdellä napsautuksella

Hanki paikka, jossa voit käyttää uusia objekteja helpommin, tallentaa Revit-perheesi ja tehdä yhteistyötä tiimisi kanssa.

  • ValintamerkkiTyöskentele suoraan BIM-objektien kanssa Revitin vieressä
  • Valintamerkki 2 Gt pilvitallennustilaa – tallenna Revit-sisältösi
  • Valintamerkki Hanki sisällysluettelon hiilijalanjälkilaskenta (A1–A3) suoraan Revitistä