Julkaise tuotteesi
Automatic Air Vent Valves - W-PQ21X-16
Watts

Automatic Air Vent Valves - W-PQ21X-16

Series W-PQ21X-16P Automatic Air Vent Valves provide automatic air venting for hot or cold water distribution systems. These vents purge air that may be in the water system.

The vent valve utilizes a float to actuate the valve plug which is located at the top of the valve. Once the air is displaced and the system pressure is sustained, the valve plug seals and prevents any water from escaping from the system.

The float vent can also operate as an anti-vacuum device since it will permit air to enter the system when it must be drained. It can also be installed to permit the separation and dispersal of air while fluid is actually circulating in the system.

Tekniset tiedot
  • Features

    • Body and cover are stainless steel construction
    • Air vent with silicone rubber seal
    • Impurities do not usually affect function as maximum float line of water is always lower than the valve seal
    • Float is high temperature resistant polypropylene
    • Suitable for use with water or glycol systems (less than or equal to 50% ethylene glycol)
    • Can be disassembled for inspection and cleaning
Tekniset tiedot
  • Yksilöity viiteAutomatic-Air-Vent-Valves-w-pq21x-16
  • TuoteperheHVAC & Hot Water Solutions
  • TuoteryhmäHeating Valves & Accessories
  • TyyppiObjekti (yksittäinen objekti)
  • Julkaisupäivä2026-06-04
  • Painoksen numero1
Liittyviä
  • Ensisijainen materiaaliBronze
  • Suunniteltu:Yhdysvallat
  • Valmistettu:Yhdysvallat
Luokitus
  • BIMobject-luokkaPutkityöt - Putkisto
  • IFC-luokitusPutkiliitin
  • CSI MasterFormat 2014 -koodi23 37 00
  • CSI MasterFormat 2014 -nimikeAir Outlets and Inlets
  • OmniClass-numero23-33 49 21 11
  • OmniClass-nimikeAir Outlets and Inlets
  • CSI UniFormat II -koodiD20
  • CSI UniFormat II -nimikePLUMBING

Alueellinen saatavuus

Pohjois-Amerikka
Kanada
Yhdysvallat
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Lataa perheet suoraan Revit-malliisi yhdellä napsautuksella

Hanki paikka, jossa voit käyttää uusia objekteja helpommin, tallentaa Revit-perheesi ja tehdä yhteistyötä tiimisi kanssa.

  • ValintamerkkiTyöskentele suoraan BIM-objektien kanssa Revitin vieressä
  • Valintamerkki 2 Gt pilvitallennustilaa – tallenna Revit-sisältösi
  • Valintamerkki Hanki sisällysluettelon hiilijalanjälkilaskenta (A1–A3) suoraan Revitistä