Z874-12 Trench Drain System (USA Configurable)

Zurn Z874-12 Trench Drain System. High density polyethylene structural composite drain channel with 1.00 Percent bottom slope. All sections modular 80 inch lengths with interlocking ends and radiused bottom. Complete with heavy-duty Dura-Coated steel frame w/ anchor studs at surface, combination anchor tabs/leveling devices at appropriate locations and class C extra heavy-duty ductile iron grate-with 4 stainless steel lockdowns. USA Configurable

Model contains -U4 bottom outlets

Saves labor up to 75%
Rebar clips provided with system for elevation set
4-corner grate lock down for dynamic loading situations
Mechanical interlocking connections

Tekniset tiedot

ENGINEERING SPECIFICATION: Zurn Z874-12 Channels shall be 80" long, 17" wide reveal and have a 12" wide throat. Modular channel sections shall be made of 0% water absorbent High Density Polyethylene (HDPE). Shall have a positive mechanical connection between channel sections that will not separate during the installation and shall mechanically lock into the concrete surround every 10". Channels shall weigh less than 6.6 lbs. per linear foot, have smooth 3.5" radiused self cleaning bottom with a Manning's coefficient of .009 and 1.00% or neutral 0% built-in slope. Channels are available with inverts ranging from 9.25" to 34.21". Channel shall have all grates locked down. Channels come with clips attached to the frame to accommodate vertical re-bar for positioning and anchoring purposes. Shall be provided with the standard DGC grate, Zurn 16-1/4" wide Ductile Iron Slotted Grate, which locks down to the frame with 4 individual bolt anchors per grate. Ductile Iron conforms to ASTM specification A536-84, Grade 80-55-06. Ductile Iron grate is rated class C per the DIN EN1433 top load classifications. Supplied in 20" [508 mm] nominal lengths with 13/16" wide slots, and 1-3/4" bearing depth. Grate has an open area of 118 sq. in. per ft. [249779] sq. mm per meter]. The 1/4" thick Carbon Steel Frame Assembly conforms to ASTM specification A36 with 10 - 4" long concrete anchors per 80". The frame is supplied with a powder coated finish. All welds must be performed by a certified welder per ASTM standard AWS D1.1. Frames shall be produced in the USA.

Tekniset tiedot

Yksilöity viiteZ874-12
TuoteperheLinear Trench Drain Systems
TuoteryhmäHDPE
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2022-07-20
Painoksen numero1
Leveys (tuumaa)17
Syvyys (tuumaa)80

Linkit

Liittyviä

Ensisijainen materiaaliHigh-density polyethylene (HDPE)
Toissijainen materiaaliDuctile Iron
Suunniteltu:Yhdysvallat

Luokitus

BIMobject-luokkaPutkityöt - Vedenpoisto
IFC-luokitusObjekti
Uniclass 2015 -koodiPr_65_52_24_24
Uniclass 2015 -kuvausDrainage channels with gratings
CSI MasterFormat 2014 -koodi22 14 26.19
CSI MasterFormat 2014 -nimikeFacility Trench Drains
OmniClass-numero23-39 29 13 19
OmniClass-nimikeSurface Water Drainage Systems
CSI UniFormat II -koodiD20
CSI UniFormat II -nimikePLUMBING

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret