Termékek közzététele
2641S Sequential mechanical basin mixer
2641S Sequential mechanical basin mixer
2641S Sequential mechanical basin mixer
    DELABIE
    Archivált

    2641S Sequential mechanical basin mixer

    Wall-mounted sequential mechanical basin mixer. Mechanical sequential mixer: opens and closes on cold water, with 70° turning range. Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet. Spout suitable for fitting a BIOFIL point-of-use filter. Spout can be easily fixed in place. Securitouch thermal insulation prevents burns. Ø 35mm classic ceramic cartridge with pre-set maximum temperature limiter. Body and spout with narrow tubes with smooth interiors and very low water volume. The speed of the water reduces the development of biofilm. Thermal shocks are possible without removing the control lever or shutting off the cold water supply. Flow rate regulated at 4 lpm. Chrome-plated brass body. Hygiene control lever L. 150mm requires no manual contact. Mixer with 150mm centres supplied with offset standard wall connectors M1/2" M3/4". Recommended installation height: 110 - 200mm above the basin surface. Mechanical mixer ideal for Healthcare facilities, retirement and care homes, hospitals and clinics. Sequential mixer suitable for people with reduced mobility. Mixer with 30-year warranty.
    Műszaki specifikáció
    • Egyedi azonosító2641S
    • TermékcsaládSanitary
    • TermékcsoportBasin mixer
    • TípusObjektum (egy termék)
    • Megjelenés dátuma2021-05-31
    • Verziószám1
    • Magasság (mm)175
    • Szélesség (mm)215
    • Mélység (mm)278
    Kapcsolódó adatok
    • Elsődleges anyagSárgaréz
    • Tervezés helyeFranciaország
    • Gyártás helyeFranciaország
    • Nettó tömeg (kg)1781
    Besorolások
    • BIMobject kategóriaHigiénia - Csapok, rózsák, rézáru
    • IFC besorolásHigiéniai terminál
    • ETIM-kódEC011328
    • ETIM-névWashbasin mixing tap
    • Uniclass 2015 kódPr_40_20
    • Uniclass 2015 leírásSanitary fittings and accessories
    • OmniClass szám23-31 11 00
    • OmniClass névFaucets
    Common.Footer.ValueProp.Image.AltText

    Design App a Revithez

    Töltse be a családokat közvetlenül a Revit modelljébe egyetlen kattintással

    Szerezzen egy helyet, ahol könnyebben hozzáférhet az új objektumokhoz, tárolhatja a Revit családokat és együttműködhet csapatával.

    • PipaDolgozzon közvetlenül a BIM objektumokkal a Revit mellett
    • Pipa 2 GB felhőtárhely – tárolja Revit tartalmát
    • Pipa Szerezzen be megtestesült szén-dioxid LCA-t (A1-A3) közvetlenül a Revitből