Termékek közzététele
Wind-Driven Rain Resistant Stationary Louver EME6325D
Ruskin

Wind-Driven Rain Resistant Stationary Louver EME6325D

The EME6325D is Miami Dade and Florida approved.  This 6" deep vertical louver passed the TAS-100A wind driven rain test without a damper or sloped duct at rear.  It features:

AMCA 540 (Enhanced) and AMCA 550 listed louver with the Air Movement and Control Association
Tested to the following FBC/Miami Dade County Test protocols
TAS-100A Wind Driven Rain Test
TAS-201 Large Missile Impact Test
TAS-202 Uniform Static pressure 
TAS-203 Cyclic Pressure Test
Miami DADE NOA #20-1201.04
 Approved for locations up to 33 ft. above grade for "dry" room locations.
AMCA Certified Class A 99.9% effective ratio wind driven rain performance at both 29 mph and 50 mph.
AMCA Certified Air and Water Penetration.
Aluminum clip angle installation.

Specifikáció
  • The EME6325D is Miami Dade and Florida approved.  This 6" deep vertical louver passed the TAS-100A wind driven rain test without a damper or sloped duct at rear.  It features:

    • AMCA 540 (Enhanced) and AMCA 550 listed louver with the Air Movement and Control Association
    • Tested to the following FBC/Miami Dade County Test protocols
    • TAS-100A Wind Driven Rain Test
    • TAS-201 Large Missile Impact Test
    • TAS-202 Uniform Static pressure 
    • TAS-203 Cyclic Pressure Test
    • Miami DADE NOA #20-1201.04
    •  Approved for locations up to 33 ft. above grade for "dry" room locations.
    • AMCA Certified Class A 99.9% effective ratio wind driven rain performance at both 29 mph and 50 mph.
    • AMCA Certified Air and Water Penetration.
    • Aluminum clip angle installation.

Műszaki specifikáció
  • Egyedi azonosítóruskin-007
  • TermékcsaládFixed Exterior Louvers and Grilles
  • TermékcsoportHurricane Louvers
  • TípusObjektum (egy termék)
  • Megjelenés dátuma2011-12-01
  • Verziószám1
Besorolások
  • BIMobject kategóriaAjtók - Redőnyök

Termék elérhetősége

Észak-Amerika
Egyesült Államok
Common.Footer.ValueProp.Image.AltText

Design App a Revithez

Töltse be a családokat közvetlenül a Revit modelljébe egyetlen kattintással

Szerezzen egy helyet, ahol könnyebben hozzáférhet az új objektumokhoz, tárolhatja a Revit családokat és együttműködhet csapatával.

  • PipaDolgozzon közvetlenül a BIM objektumokkal a Revit mellett
  • Pipa 2 GB felhőtárhely – tárolja Revit tartalmát
  • Pipa Szerezzen be megtestesült szén-dioxid LCA-t (A1-A3) közvetlenül a Revitből