A szolgáltatásaink igénybevételével Ön elfogadja a cookie-k (sütik) használatát itt !

Egyetértek
;

CH Ytong Thermobloc 480 U=0,16 W/(m²K) d=494 mm

Egyedi azonosító: COM_CH_Y_Thermobloc_480_U_0-16_d_494
Gyártó: Ytong
Termék család: Ytong AAC
Termék csoport: Composite
Szélesség (mm): 1000
Magasság (mm): 1000
Mélység (mm): 494
Publikálás dátuma: 2018-03-19
Verziószám: 1
Típus: Objektum (egy termék)
Letöltés (12)
The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures.
The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use.

Advantages:
- Thermal conductivity from λ = 0.08 W/(mK)
- Homogeneous, monolithic - without additional insulation
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing

Construction - U = 0,16 W/(m²K):

- 5 mm Multipor lightweight mortar as internal plastering - GTIN: 4054649000590
- 480 mm Ytong Thermobloc 08 - GTIN: 4054640008144
- 5 mm Multipor lightweight mortar as base coat - GTIN: 4054649000590
- 3 mm Multipor lightweight mortar as finish render (floated) - GTIN: 4054649000590
< 1 mm Multipor silicate facade paint

The planning and execution of the masonry must take account of the cantonal building regulations and building laws (for example MuKEn), the corresponding standards of the SIA, as well as statutory and private law requirements (the law of obligations).

Technical characteristics of the Ytong masonry:
Dry bulk density: ρ = 325 kg/m³
Characteristic masonry compressive strength: fxk = 1.80 N/mm²
Design value of masonry compressive strength: fxd = 0.90 N/ mm²
Characteristic masonry bending tensile strength ffxk = 0.15 N/mm²
Characteristic shear modulus of the masonry: Gk = 0.72 kN/mm²
Design value of the modulus of elasticity: Exd = 0.90 kN/mm²
Calculated thermal conductivity λ = 0.08 W/(mK)
Heat storage capacity c = 1000 J/kg K
Weighted sound reduction index (external wall, masonry, plastered on both sides) Rw = 51 dB
Fire resistance class REI-M 180

The present tool supports you in the planning of masonry made of Ytong Thermoblocks, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must be conform to local regulations. The use of the object must therefore be verified independently.


Elsődleges anyag: Aerated concrete
Másodlagos anyag: Plaster
Tervezés helye: Switzerland
Gyártás helye: Germany

BIMobject kategória: Falak - Külső falak
IFC besorolás: Wall
UNSPSC név: Bricks
UNSPSC kód: 301316
Uniclass 1.4 Kód: L83122
Uniclass 1.4 Leírás: Wall units
Uniclass 2.0 Kód: SS-25-13-50
Uniclass 2.0 Leírás: Masonry Wall Systems
Uniclass 2015 Kód: Ss_25_13_50
Uniclass 2015 Leírás: Masonry wall systems
NBS Reference Kód: 25-13-50
NBS Reference Leírás: Masonry Wall Systems
CSI MasterFormat 2014 kód: 04 22 26
CSI MasterFormat 2014 cím: Autoclaved Aerated Concrete Unit Masonry
OmniClass szám: 23-13 35 21 13
OmniClass cím: Masonry Structural Walls
CSI UniFormat II kód: B2010
CSI UniFormat II cím: Exterior Walls
Ez a termék elérhető:
Europe
  • Switzerland

BIMobject SEEK Properties

Walls - External Walls

Név Érték
Depth 494
Insulation Thickness 480 mm
Insulation Type Ytong AAC (Autoclaved Aerated Concrete)
Intended Function Monolithic exterior wall
Material Ytong AAC (Autoclaved Aerated Concrete)
Width 494 mm

COBie UK

UK.COBie.Type

UK.COBie.Type

This property set allows objects to be COBie UK BIM Level 2 classified

Név Érték
Material Ytong AAC (Autoclaved Aerated Concrete)

BIMobject®