Pubblica i tuoi prodotti
Electric cable connection kit NF C15-100
Electric cable connection kit NF C15-100
    Nexans

    Electric cable connection kit NF C15-100

    The NEXANS EV NETWORK (Electric Vehicle) solution has been specially designed to supply Electric Vehicle Charging Infrastructures (EVCI) in covered car parks. Its design allows a quick connection of charging stations through branch cables.

    The NEXANS EV-NETWORK solution provides several advantages compared to the individual cabling of each charging station:

    • modularity and scalability of the installation,
    • space-saving in the switchboard, in cable trays, core drilling
    • cost-effective, with reduced cable length and easiest maintenance

    Cables comply with the requirements of the Construction Products Regulation “CPR (EU) n° 305/2011” with an improved fire performance class: Cca - s1, d1, a1. They are fire retardant and low fire hazard cables, with low smoke and reduced emissions of toxic and corrosive gasses (LS0H).

    Voce di capitolato
    • Construction

      The NEXANS EV-NETWORK connection kit NF C15-100 is made of:

      Branch cables to connect, simultaneously or later, the charging stations to the BUS cable via dedicated connectors - FRN1X1G1 AR ou FRN1X1G1 type of cables >= 16mm² Cu or >=25mm² Al for 7,4 kW et 22 kW.

      • 2 single core cables - 25 mm² (mono)
      • 3 single core cables - 25 mm² (tri)

      Connectors
      : These connectors are used in installations serving electric vehicle charging infrastructures installed in car parks to connect individual branches to the collective horizontal conduit in the car park. Phase, neutral and PE connector + terminal insulation of the branch

      • GE003 KIT MONO CONNECTEURS IRVE 50-70
      • GE005 KIT TRI CONNECTEURS IRVE 50-70

      Terminations
      : these kits are used to connect the end of the main cable. They provide a protection type class II and consist of 5 cold-shrink caps (4 for the conductors and 1 covering the whole assembly to provide double insulation). A strip of mastic provides a perfect seal.

      • GE010 KIT EXTREMITE IRVE 50-70
      • GE011 KIT EXTREMITE IRVE 50-150

      Insulated conductors VK
      - 16mm² at minimum for 7,4 kW et 22 kW

      Connection Box
      - Box type IP65 IK07 installed:

      • Height ≥ 0,90m
      • Height ≥ 1,50m
      • On wall, pole or cable trays
      Specifiche tecniche
      • Rif. Unicoelectric_cable_connection_kit_according_to_nf_c15_100
      • TipoMontaggio (oggetti multipli)
      • Data di pubblicazione2025-08-21
      • Numero di versione1
      Relativo a
      • Materiale principaleAlluminio
      • Materiale secondarioPolymer
      • Progettato inFrancia
      • Prodotto inFrancia
      Classificazioni
      • Categoria BIMobjectImpianti elettrici - Electric cables
      • Clasificazione IFCSegmento cavi
      • Codice ETIMEG000001
      • Nome ETIMCables
      • Codice Uniclass 2015Pr_65_70_48
      • Descrizione Uniclass 2015Low voltage cables
      • Numero OmniClass23-13 23 21 15
      • Titolo OmniClassCables

      Disponibilità Regionale

      Europa
      Francia
      Common.Footer.ValueProp.Image.AltText

      App di progettazione per Revit

      Carica le famiglie direttamente nel tuo modello Revit con un solo clic

      Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

      • Segno di spuntaLavora direttamente con gli oggetti BIM accanto a Revit
      • Segno di spunta 2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
      • Segno di spunta Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit