製品の公開
INTRA Easy Automatic foam dispenser
Intra
アーカイブ

INTRA Easy Automatic foam dispenser

Automatic Foam Soap Dispenser A foam drop is dispensed out of the nozzle on unit bottom each time its sensor is activated. Powered by 4 AA-size batteries (not included). Capacity: 33.8 oz. (1000 ml) of liquid foaming soaps within a wide range of viscosity.
仕様
  • Automatic Foam Soap Dispenser shall hold 33.8 oz (1000 ml) of liquid foaming soaps within the viscosity range of 5-1500cP (MPa∙s) and pH range of 5-9 and dispense in cycles of single shot foam volume ranging from 1/2 oz to 1/3 oz (7 cm³ to 9cm³) using 0.02 oz~0.03 oz (0.6~0.77 ml) liquid for each shot. Operation is initiated by hands-free sensor controlled bymicroprocessor digital circuitry powered by four (4) AA size 1.5V batteries (supplied by others) in a concealed compartmentand locked inside unit bottom. Unit shall be fabricated of 22 gauge (.031" [0.8] thick) type 304 stainless steel alloy 18-8 witha uniform satin finish over all exposed surfaces. Cover shall have lock keyed alike with other ASI washroom accessories. Unit shall have an LED to indicate function and operational condition on front face. Internal tank shall be translucent to show quantity of soap remaining at any time when cover is opened and shall be easily removed to facilitate filling and external storage of full tanks. Unit shall mount to wall on concealed base plate with screws secured under locked cover.
技術仕様
  • Unique refASI20365
  • コレクションセットHygiene products
  • コレクション351
  • タイプオブジェクト(1つのオブジェクト)
  • エディション1
  • 高さ(Mm)276
  • 幅(mm)140
  • 奥行き(mm)102
関連
  • 主なマテリアルステンレス
  • 設計国アメリカ合衆国
  • 製造国アメリカ合衆国
識別情報
  • BIMobjectカテゴリサニタリー - ディスペンサー
  • IFC分類オブジェクト
  • Uniclass2015コードPr_40_70_22_81
  • Uniclass2015詳細Soap dispensers
  • OmniClassNumber23-31 25 29 13
  • OmniClassタイトルHand Soap Dispensers
Common.Footer.ValueProp.Image.AltText

Revit用デザインアプリ

ワンクリックでRevitモデルにファミリを直接ロード

新しいオブジェクトに簡単にアクセスし、Revitファミリを保存し、チームと共同作業できる場所を入手してください。

  • チェックマークRevitの横でBIMオブジェクトを直接操作
  • チェックマーク 2GBのクラウドストレージ - Revitコンテンツを保存
  • チェックマーク Revitから直接エンボディドカーボンLCA(A1-A3)を取得