STRUCTURE
Perimeter load-bearing structure made of double sandwich panels in Magnelis® and external aesthetic cladding panels with a painted finish. The panels are insulated with 20 mm thick high-performance insulation.
VENTILATION
Brushless plug fans with electronically controlled motors and modulating control for both extract and supply air.
Very high efficiency and low noise levels, in compliance with ErP 2018 requirements.
FILTRATION
Flat Coarse filter according to ISO 16890 (G4 EN 779) on the recirculation air circuit, and ePM1 70% filters (F7 EN 779) on the outdoor air intake and extract air circuits.
AIR TREATMENT
Static counterflow polypropylene heat exchanger for heat recovery from the exhaust air. Copper-aluminium water-to-air heat exchange coil with optimized geometry for dehumidification or supplementary cooling and heating. Hydraulic connections located on the underside of the unit.
CONTROL
On-board electrical panel with microprocessor and complete control software: fan speed modulation according to the difference between the measured and set temperatures, control of the recirculation damper and coil water valve, fresh air management, timer-based dirty filter monitoring, and graphical interface with colour touchscreen panel featuring user and configuration menus.
3.5 
