Architectural Masonry Units - Gemstone®

Google翻訳”,

^Gemstone®ユニットに使用されている天然骨材は、ユニット表面を研磨して滑らかな「磨き仕上げ」にすることで引き出されています。その後、軽くシーラーを塗布することで、光沢を増し、配送および設置時のブロックの保護にも役立ちます。また、表面に影響を与える可能性のある自然環境要因に対する耐性も高めます。Gemstoneユニットは、建物の内外装の両方に使用されています。

仕様

Gemstone® architectural masonry units are integrally colored, and are finished by grinding the face to expose the aggregates. An acrylic sealer is then applied to all finished faces during production at the factory.

Gemstone® units are manufactured to comply with ASTM C-90. Additionally, all units contain integral water repellent for moisture and efflorescence control.
A field-applied acrylic sealer is recommended for all Gemstone® installations. This application will highlight the aggregates, add increased water resistance, and can provide additional moisture protection of the wall envelope mortar joints as it is sprayed or rolled over the wall surface.

Gemstone® units can be provided with any face finished (front, back, or either end), depending on your project needs. Production capabilities include all typical CMU sizes and shapes including:
- 4x8x16, 6x8x16, 8x8x16, 10x8x16 and 12x8x16 in hollow and solid units.
- 4x8x24, 4x12x24, 4x16x24, 4x12x12 and 4x16x16 solid units.
- Bullnose or chamfered edges
- Specialty shapes such as bond beams, sills, insulated units, accoustical units, etc.

For further information, please refer to the latest version of ASTM C 90, contact your YBP representative, or contact YBP’s Customer Care at sales@yorkbuilding.com or 800.673.2408.