제품 게시
ARDEX K 70 - Coarse-grained floor putty
ARDEX

ARDEX K 70 - Coarse-grained floor putty

ARDEX K 70 is a cement-based floor putty and thin plaster for leveling and leveling substrates with large level differences. Suitable for raw concrete, cement and anhydrite coatings, terrazzo floors, tile and tile coatings etc. As a wear layer in the basement room, hobby room, halls, utility rooms, storage and storage rooms, halls and workshops with moderate impact and impact loads.
사양
  • Material consumption: Approximately 1.7 kg of powder per. m² / mm. Processing time: Approx. 30 minutes at 20 ° C. Pedestrian: After approx. 2 hours at 20 ° C. Coating ready: After approx. 24 hours. Pressure strength: (DIN 1164) After 1 day 13 N / mm². After 7 days 20 N / mm². After 28 days 27 N / mm². Bending pressure strength: (DIN 1164) After 1 day 4 N / mm². After 7 days 6 N / mm². After 28 days 7 N / mm². Ball Pressure Hardness: (Brinell) After 1 day 50 N / mm². After 7 days 60 N / mm². After 28 days 70 N / mm².
기술 사양
  • 특징 참조ARDEX-K-70
  • 제품군Subfloor Preparation
  • 제품분류Self-Leveling Underlayment
  • 유형개체 (단일 개체)
  • 게시일2019-11-07
  • 에디션 넘버1
관련성
  • 설계국가덴마크
  • 제조국가덴마크
분류
  • BIMobject 카테고리바닥재 - 언더레이
  • IFC 분류Floor
  • UNSPSC 이름Carpet or rug underlays
  • UNSPSC 코드30161719
  • Uniclass 2015 코드Pr_35_31_06_80
  • Uniclass 2015 설명Smoothing and levelling underlay compounds
  • CSI 마스터 형식 2014 코드06 16 26
  • CSI 마스터 형식 2014 제목Underlayment
  • OmniClass 번호23-15 17 11 13 11 13
  • OmniClass 제목Portland Cement Floor Underlayments
  • CSI 단일 형식 II 코드B1010
  • CSI 단일 형식 II 제목Floor Construction

지역 가용성

유럽
덴마크
스웨덴
Common.Footer.ValueProp.Image.AltText

Revit용 Design App

한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

  • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
  • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
  • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득