ARDEX MG Natural Stone Grouting

Grouting for discoloration-free jointing of natural stone and natural stone slabs of marble, Jura marble, Solnhofner limestone, granite, quartzite, inter alia, on wall and floor in the interior.

The grouting of natural stone coverings, especially discoloration-sensitive materials, often requires the use of special Fugmaterialien. ARDEX MG is specially designed for this area. Because the ARDURAPID® effect ensures that the mixing water is completely and quickly bound in crystalline form and that no moisture can migrate into the natural stone, thus effectively avoiding edge discoloration: a unique system for protecting your valuable natural stone surfaces. In addition, ARDEX MG has a high abrasion resistance and a reduced water absorption. The mortar is very easy to work with and even deep joints can be filled in one go. ARDEX MG is fast setting and therefore fast washable and durable. The application area includes the discoloration-free grouting of natural stone and natural stone slabs of marble, Jura marble, Solnhofner limestone, granite, quartzite, inter alia on interior wall and floor surfaces as well as porcelain stoneware tiles up to 8 mm joint width. ARDEX MG meets the requirements of CG2 WA according to EN 13888 and is very low in emissions - EC 1 R PLUS - according to GEV EMICODE.

Product Highlights:

For joint widths up to 8 mm
Discoloration-free grouting of natural stone and natural stone slabs
Prevents edge discoloration
With increased abrasion resistance and reduced water absorption
CG2 WA according to EN 13888

사양

Technical specifications
bulk weight
approx. 1.30 kg / l
fresh weight
approx. 1.90 kg / l
Processing time at + 20 ° C
approx. 30 min
underfloor heating fitness
Yes
packing
Bag with 5.00 kg net
packed to 4 pieces
52 packing units / pallet
storage
Can be stored in dry rooms for approx. 12 months in the original sealed container.
Mixing ratio
approx. 7.75 l water: 25.00 kg ARDEX MG
Accessibility at + 20 ° C
after approx. 90 min
colour
brilliant white
silver gray
stone gray
anthracite
Sand beige
jura beige
material requirements
For joint width 3.00 mm , joint depth 5.00 mm
for plates
from 60 x 60 cm approx. 0.10 kg / m²
from 60 x 30 cm approx. 0.15 kg / m²
from 30 x 30 cm approx. 0.20 kg / m²
of 15 x 30 cm approx. 0.30 kg / m²
from 20 x 30 cm approx. 0.25 kg / m²
The additional losses due to excess material on the tiles amount to 0.05 - 0.10 kg / m² depending on their surface condition and method of operation .
GISCODE
ZP 1 = cementitious product
EMICODE
EC1

Ball indentation hardness
after 1 day approx. 40.00 N / mm²
after 3 days approx. 60.00 N / mm²
after 7 days approx. 70.00 N / mm²
after 28 days approx. 80.00 N / mm²