제품 게시
ARDEX RA 56 - Low-Viscosity Rigid Hybrid Polyurethane Crack & Spall Repair
ARDEX RA 56 - Low-Viscosity Rigid Hybrid Polyurethane Crack & Spall Repair
ARDEX RA 56 - Low-Viscosity Rigid Hybrid Polyurethane Crack & Spall Repair
    ARDEX

    ARDEX RA 56 - Low-Viscosity Rigid Hybrid Polyurethane Crack & Spall Repair

    ARDEX RA 56 is an ultra-low viscosity, 2-component hybrid polyurethane adhesive. It is a rapid curing concrete repair material used when minimal down time is crucial. Its low viscosity offers deep penetration into hairline cracks for a structural repair. The addition of dry, bagged aggregate makes a quality spall repair product that is ready for grinding and open to traffic in less than 1 hour.

    Substrates:

    • Concrete
    사양
    • Colour: Grey Viscosity Mixed: 60 centipoise Gel Time (+24°C): 2 - 3 minutes Cure Time (+24°C): 60 minutes (reopen to traffic) Tack-free Time (+24°C): 12 minutes Compressive Strength 1 hour (neat): 33.8 MPa Compressive Strength 24 hour (neat): 36.5 MPa Tensile Strength: 28.7 MPa Elongation: 5% Bond Strength: 13.1 MPa Shore D Hardness: 70 Adhesion to Concrete: 1.9 MPa
    기술 사양
    • 특징 참조Ardex-ra-56
    • 제품군Concrete Repair
    • 제품분류Crack and Spall Repair
    • 유형개체 (단일 개체)
    • 게시일2019-08-26
    • 에디션 넘버1
    관련성
    • 주 재료Cementitious
    • 설계국가오스트레일리아
    • 제조국가오스트레일리아
    분류
    • BIMobject 카테고리건축 자재 - 콘크리트
    • UNSPSC 이름Interior finishing materials
    • UNSPSC 코드3016
    • Uniclass 2015 코드Pr_35
    • Uniclass 2015 설명Covering and finishing products
    • CSI 마스터 형식 2014 코드09 00 00
    • CSI 마스터 형식 2014 제목Finishes
    • OmniClass 번호23-15 00 00
    • OmniClass 제목Interior and Finish Products
    • CSI 단일 형식 II 코드C30
    • CSI 단일 형식 II 제목INTERIOR FINISHES

    지역 가용성

    오세아니아 아시아
    뉴질랜드
    싱가포르
    오스트레일리아
    태국
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득