4.4 한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.
새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.
Revit 바로 옆에서 BIM 개체로 직접 작업 - 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
- Revit에서 바로 내재 탄소 LCA(A1-A3) 획득
보관됨
No. 100-CR AWWA 90° Long Radius Reducing Elbow
Supplied with rigid radius grooves in accordance with ANSI/AWWA C-606. Fittings conform to ANSI 21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI 21.10/AWWA C-110 for wall thickness. Available with a wide variety of coatings and linings.
Tapped fittings also available.
AWWA FITTINGS
Victaulic fittings for AWWA size pipe are supplied with rigid radius grooves in accordance with ANSI/AWWA C-606. Fittings conform to ANSI A21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI A21.10/AWWA C-110 for wall thickness.
While most requirements are specified “black” or non-coated, fittings can be supplied with an alkyd-phenolic primer, or bituminous coating. Coal tar epoxy and other coatings are also available. The standard black asphalt coating used on our cement lined AWWA size fittings is NSF 61 Listed. Cast surfaces will be provided with surface equivalent to SSPC-SP6 prior to coating unless specified otherwise. Fittings are available with flanged ends wherever grooved ends are shown.
Linings include cement/mortar Type 2 (standard) and others. Fittings can readily be prepared for glass lining by others.
Fittings are rated for working pressures to 350 psi/2400 kPa (ductile iron) in 3 – 12"/80 – 300 mm sizes and to 250 psi/1725 kPa (gray iron) in sizes 3 – 12"/80 – 300 mm, and to 250 psi/1725 kPa (ductile iron), or 150 psi/1035 kPa (gray iron) for 14"/350 mm and larger. Victaulic fittings shown have an end-to-end dimension tolerance of ±1/8" in all sizes and styles.
CAST FITTINGS – TAPPED
Victaulic can supply tapped fittings on order to ANSI B16.1 dimension locations. Specify fitting size, tap location by letter on order.
BASE FITTINGS
Grooved end base 90° elbows and base tees are available with dimensions to ANSI B16.1.
For additional information as well as Cad files please visit the Victaulic website through the "View at Source" link above.
Tapped fittings also available.
AWWA FITTINGS
Victaulic fittings for AWWA size pipe are supplied with rigid radius grooves in accordance with ANSI/AWWA C-606. Fittings conform to ANSI A21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI A21.10/AWWA C-110 for wall thickness.
While most requirements are specified “black” or non-coated, fittings can be supplied with an alkyd-phenolic primer, or bituminous coating. Coal tar epoxy and other coatings are also available. The standard black asphalt coating used on our cement lined AWWA size fittings is NSF 61 Listed. Cast surfaces will be provided with surface equivalent to SSPC-SP6 prior to coating unless specified otherwise. Fittings are available with flanged ends wherever grooved ends are shown.
Linings include cement/mortar Type 2 (standard) and others. Fittings can readily be prepared for glass lining by others.
Fittings are rated for working pressures to 350 psi/2400 kPa (ductile iron) in 3 – 12"/80 – 300 mm sizes and to 250 psi/1725 kPa (gray iron) in sizes 3 – 12"/80 – 300 mm, and to 250 psi/1725 kPa (ductile iron), or 150 psi/1035 kPa (gray iron) for 14"/350 mm and larger. Victaulic fittings shown have an end-to-end dimension tolerance of ±1/8" in all sizes and styles.
CAST FITTINGS – TAPPED
Victaulic can supply tapped fittings on order to ANSI B16.1 dimension locations. Specify fitting size, tap location by letter on order.
BASE FITTINGS
Grooved end base 90° elbows and base tees are available with dimensions to ANSI B16.1.
For additional information as well as Cad files please visit the Victaulic website through the "View at Source" link above.
비슷한 제품
Revit용 Design App
한국의
