4.4 한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.
새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.
Revit 바로 옆에서 BIM 개체로 직접 작업 - 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
- Revit에서 바로 내재 탄소 LCA(A1-A3) 획득
보관됨
Style 741 Vic-Flange® Adapter ANSI Class 125/150
Style 741 Vic-Flange® adapter is designed for directly incorporating flanged components with ANSI CL. 125 or CL. 150/PN10 and PN16 or Australian Standard Table “E” bolt hole patterns into a grooved pipe system. Sizes 2 - 12"/50 - 300 mm are hinged for easy handling with integral end tabs which facilitate assembly. Sizes 14 - 24"/350 - 600 mm are cast in four (4) identical segments which are interconnected as assembly is completed.
The design incorporates small teeth inside the key shoulder I.D. to prevent rotation (excluding 159 mm size). These teeth should be removed when Vic-Flange adapter is utilized with a Victaulic Series 700 grooved end butterfly valve, Schedule 5 pipe or plastic pipe.
Vic-Flange adapter Style 741 is not recommended for use with Victaulic Series 709 butterfly valves (contact Victaulic for recommendations). They may only be used on one side of Victaulic Series 700 butterfly valve, sizes 2 - 4"/50 - 100 mm fitted with standard or lever-lock handles. Vic-Flange adapter must be assembled so it does not interfere with handle operation.
The design incorporates small teeth inside the key shoulder I.D. to prevent rotation (excluding 159 mm size). These teeth should be removed when Vic-Flange adapter is utilized with a Victaulic Series 700 grooved end butterfly valve, Schedule 5 pipe or plastic pipe.
Vic-Flange adapter Style 741 is not recommended for use with Victaulic Series 709 butterfly valves (contact Victaulic for recommendations). They may only be used on one side of Victaulic Series 700 butterfly valve, sizes 2 - 4"/50 - 100 mm fitted with standard or lever-lock handles. Vic-Flange adapter must be assembled so it does not interfere with handle operation.
Revit용 Design App
한국의
