제품 게시
Double Check Detector Assemblies, Stainless Steel - 757DCDA, 757NDCDA
Double Check Detector Assemblies, Stainless Steel - 757DCDA, 757NDCDA
    Watts

    Double Check Detector Assemblies, Stainless Steel - 757DCDA, 757NDCDA

    별점 4.0/54.0(7 리뷰)
    Series 757DCDA, 757NDCDA Double Check Detector Assemblies prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. Its compact housing consists of two independently operating tri-link check valves, two shutoff valves, and four test cocks. It features a stainless steel housing and sleeve and is 70% lighter than traditional designs. Series 757, 757N is designed for non-health hazard applications and may be installed under continuous pressure service to protect against both backpressure and backsiphonage. This Series is used primarily on fire sprinkler lines when it is necessary to monitor unauthorized use of water. Maximum Working Pressure: 175psi (12.06 bar).
    사양
    • Body Material: Stainless Steel
      Connection Size: 2-1/2", 3", 4", 6", 8", 10"
      Connection Type: Flanged and Grooved Connections
      Industry Standards: Approved by the Foundation for Cross-Connection Control and Hydraulic Research at The University of Southern California (FCCCHR-USC)
      Working Pressure: 175psi (12.1 bar)
      Maximum Working Temperature: 140°F (60°C)Keywords: 110v, 175psi, 220v, air separator, angle, backflow, backflow preventer, backflow preventer valve, backflow valve, bacteria, bacteria water filtration, ballast, bfg, boiler, boilerdrain, brass, bulb, butterfly, bypass, capacity, checkvalve, closed loop systems, dcda, detector, double, double check, doublecheck, drain, expansion tank, feedwater, fill valve, frost free, frost proof wall hydrant, gear operated, gpm, heating system, highpurge, hydronic, iron, keyoperated, lead free, meter, mipxhose, nrs, operated, osy, piv, press fitting, pressure, pressure valve, pressure zone valve, pressurized, preventer, purge, quarter turn shutoff, quarts sleeve, rdza, reduce pressure valve, reduce pressure zone, reduced pressure detector, reduced pressure valve, reducing valve, regulator, repair, rpda, rpza, sdrxhose, shut-off, stainless steel, stainless steel body, strainer, tamper switch, thread, threaded, thru-wall, ultraviolet, ultraviolet water filtration, uv, uv filtration, valve, vlv, wall hydrant, water disinfection, water filtration, watts
    기술 사양
    • 특징 참조868
    • 제품군Backflow Prevention
    • 제품분류Non-Return Valves for Liquid Services
    • 유형개체 (단일 개체)
    • 게시일2009-09-16
    • 에디션 넘버1
    관련성
    • 설계국가미국
    • 제조국가미국
    분류
    • BIMobject 카테고리배관 - 밸브

    지역 가용성

    북미
    미국
    캐나다
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득