Opublikuj swoje produkty
ARDEX K 55 - Self-Leveling Quick Putty
ARDEX

ARDEX K 55 - Self-Leveling Quick Putty

Flexible floor sealant with ARDURAPID effect.
- Optimal for renovation work.
- Primer-free in 90% of cases.
- Coating ready after about 1 hour 20 ° C.

Only indoors.

Area of use
ARDEX K 55 is a fast, self-leveling and flexible cement-based floor putty for renovation and repair work, as well as other cases where drying time is a deciding factor.

Use ARDEX K 55 for leveling and straightening of raw concrete, casting of cement and anhydrite as well as old plywood. Can be used on terrazzo floors, tile and clinker coatings etc.

Only for indoor use in dry environments. Approved for underfloor heating.

Opis
  • Texture Self-leveling and easy-flowing.

    Layer thickness 0 - 10 mm.

    Consumables Ca. 1.5 kg powder m² / mm.

    Working time Ca. 15 min. at 20 ° C.

    walkable After approx. 1 hr. dimension 20 ° C

    tileable After approx. 1 hr. at 20 ° C

Specyfikacja techniczna
  • Nr referencyjnyARDEX-K-55
  • Rodzina produktuSubfloor Preparation
  • Grupa produktuSelf-Leveling Underlayment
  • TypObiekt (jeden obiekt)
  • Data publikacji2020-01-01
  • Numer edycji1
Dodatkowe informacje
  • Zaprojektowano wSzwecja
  • Wyprodukowano wSzwecja
Klasyfikacja
  • Kategoria BIMobjectPodłogi - Podpory
  • Klasyfikacja IFCFloor
  • UNSPSC nameCarpet or rug underlays
  • UNSPSC code30161719
  • Uniclass 2015 CodePr_35_31_06_80
  • Uniclass 2015 DescriptionSmoothing and levelling underlay compounds
  • CSI MasterFormat 2014 Code06 16 26
  • CSI MasterFormat 2014 TitleUnderlayment
  • OmniClass Number23-15 17 11 13 11 13
  • OmniClass TitlePortland Cement Floor Underlayments
  • CSI UniFormat II CodeB1010
  • CSI UniFormat II TitleFloor Construction

Dostępny w krajach:

Europa
Czechy
Szwecja
Włochy
Common.Footer.ValueProp.Image.AltText

Aplikacja Design App dla Revit

Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

  • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
  • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
  • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit