Opublikuj swoje produkty
ARDEX K 70 - Coarse-grained floor putty
ARDEX

ARDEX K 70 - Coarse-grained floor putty

ARDEX K 70 is a cement-based floor putty and thin plaster for leveling and leveling substrates with large level differences. Suitable for raw concrete, cement and anhydrite coatings, terrazzo floors, tile and tile coatings etc. As a wear layer in the basement room, hobby room, halls, utility rooms, storage and storage rooms, halls and workshops with moderate impact and impact loads.
Opis
  • Material consumption: Approximately 1.7 kg of powder per. m² / mm. Processing time: Approx. 30 minutes at 20 ° C. Pedestrian: After approx. 2 hours at 20 ° C. Coating ready: After approx. 24 hours. Pressure strength: (DIN 1164) After 1 day 13 N / mm². After 7 days 20 N / mm². After 28 days 27 N / mm². Bending pressure strength: (DIN 1164) After 1 day 4 N / mm². After 7 days 6 N / mm². After 28 days 7 N / mm². Ball Pressure Hardness: (Brinell) After 1 day 50 N / mm². After 7 days 60 N / mm². After 28 days 70 N / mm².
Specyfikacja techniczna
  • Nr referencyjnyARDEX-K-70
  • Rodzina produktuSubfloor Preparation
  • Grupa produktuSelf-Leveling Underlayment
  • TypObiekt (jeden obiekt)
  • Data publikacji2019-11-07
  • Numer edycji1
Dodatkowe informacje
  • Zaprojektowano wDania
  • Wyprodukowano wDania
Klasyfikacja
  • Kategoria BIMobjectPodłogi - Podpory
  • Klasyfikacja IFCFloor
  • UNSPSC nameCarpet or rug underlays
  • UNSPSC code30161719
  • Uniclass 2015 CodePr_35_31_06_80
  • Uniclass 2015 DescriptionSmoothing and levelling underlay compounds
  • CSI MasterFormat 2014 Code06 16 26
  • CSI MasterFormat 2014 TitleUnderlayment
  • OmniClass Number23-15 17 11 13 11 13
  • OmniClass TitlePortland Cement Floor Underlayments
  • CSI UniFormat II CodeB1010
  • CSI UniFormat II TitleFloor Construction

Dostępny w krajach:

Europa
Dania
Szwecja
Common.Footer.ValueProp.Image.AltText

Aplikacja Design App dla Revit

Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

  • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
  • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
  • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit