Opublikuj swoje produkty
6DS 6″ DOWNLIGHT – SQUARE
6DS 6″ DOWNLIGHT – SQUARE
6DS 6″ DOWNLIGHT – SQUARE

    6DS 6″ DOWNLIGHT – SQUARE

    FEATURES

    • Wide range of lumen options for general illumination
    • Beam angles ranging from 25º narrow to 65º wide for tailored performance
    • Square shape accentuates architectural styles
    • New construction mounting pan, IC-rated, or pan-less remodel kit available
    • Open reflector with seven finishes complements any interior style
    • Die-cast trim choices include flush, regressed or angled lens
    • Contemporary design provides glare-free illumination for a soft ceiling appearance
    • Fully room-side accessible
    • Title 24 | JA8 compliant
    • Spring clip retention system eliminates trim sag
    • Easily adjust mounting arms below ceiling to adapt to a range of ceiling thicknesses
    • Low UGR meets LEED and WELL requirements
    • Support human-centric design with adaptive, individualized lighting using tunable white light
    • Mimic the comfortable, welcoming glow of incandescent with warm-dimming technology
    • Build America, Buy America and Buy American Act compliant
    • Wireless in-fixture control solutions available
    • Made Right Here® in the USA
      Opis
      • Housing

        Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms field adjust for ceiling thickness from 1/2″ – 2-1/4″.

        Open Reflector

        Low-iridescent anodized aluminum with top diffuser.

        Lensed Trim

        Die-cast aluminum frame with micro-prismatic, acrylic lens.

        Electrical

        High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours. Tunable White products use LEDs of multiple CCTs and may produce a perceptibly different shade of white from single-CCT products at the same CCT. All CCTs are within 3 MacAdam ellipses.

        Mounting

        Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware. Minimum 24″ O.C. marked spacing required for L50 - L100 lumen packages.

        Listings

        • cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation.
        • Suitable for wet location under covered ceiling when specified with WET/CC option.
        • IP65 rated trim when specified with IP option.
        • IC-rated for direct contact with insulation when specified with I Mounting Type.
        • City of Chicago Environmental Air approved when specified with CP option.
        • Complies with ASTM-E283 when specified with ATH option.
        • RoHS compliant.
        • Title 24 (JA8) compliant in select configurations, see www.cacertappliances.energy.ca.gov.
        • Complies with the Buy American Act and other federal regulations.
        Request certification at hew.com/buy-american.

        Warranty

        5-year limited warranty, see details
      Specyfikacja techniczna
      • Nr referencyjny6ds-downlight-square
      • Rodzina produktuIndoor Luminaires
      • Grupa produktuDownlights
      • TypObiekt (jeden obiekt)
      • Data publikacji2025-01-03
      • Numer edycji1
      Dodatkowe informacje
      • Materiał głównyMetal
      • Materiał dodatkowySzkło
      • Zaprojektowano wStany Zjednoczone
      • Wyprodukowano wStany Zjednoczone
      Klasyfikacja
      • Kategoria BIMobjectOświetlenie - Oświetlenie sufitowe
      • Klasyfikacja IFCUmocowanie światła
      • Uniclass 2015 CodeEF_70_80
      • Uniclass 2015 DescriptionLighting
      • CSI MasterFormat 2014 Code26 51 13
      • CSI MasterFormat 2014 TitleInterior Lighting Fixtures, Lamps, And Ballasts
      • OmniClass Number23-35 47 11
      • OmniClass TitleLighting Fixtures

      Dostępny w krajach:

      Ameryka północna
      Anguilla
      Antigua i Barbuda
      Aruba
      Bahamy
      Barbados
      Belize
      Bermudy
      Brytyjskie Wyspy Dziewicze
      Curaçao
      Dominika
      Dominikana
      Grenada
      Grenlandia
      Gwadelupa
      Gwatemala
      Haiti
      Holandia Karaibska
      Honduras
      Jamajka
      Kajmany
      Kanada
      Kostaryka
      Kuba
      Martynika
      Meksyk
      Montserrat
      Nikaragua
      Panama
      Portoryko
      Saint Kitts i Nevis
      Saint Lucia
      Saint Martin
      Saint Vincent i Grenadyny
      Salwador
      Sint Maarten
      Stany Zjednoczone
      Trynidad i Tobago
      Turks i Caicos
      Wspólnota Saint-Barthélemy
      Wspólnota Terytorialna Saint Pierre i Miquelon
      Wyspy Dziewicze
      Common.Footer.ValueProp.Image.AltText

      Aplikacja Design App dla Revit

      Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

      Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

      • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
      • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
      • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit