Hybrid kitchen fitting for hot water heater F5LME002

F5LME hybrid kitchen fitting DN 15 as pillar mixer with swivelling spout, can be locked in the centre position. Adjustable swivel ranges of 50°, 120° and 360°. To the connection via hoses in open undercounter boilers. Single lever mixer with mixer cartridge with ceramic disc technology and adjustable, turn-proof temperature stop. Alternative activation using hand reflection via an opto-electronic sensor for time-controlled water release with preset mixing water temperature. Mixer cartridge, solenoid valve and sensor with control electronics in all-metal housing, brushed stainless steel. With beam shaper. Projection 220 mm. Activated water hygiene flushing 24 hours after last activation, safety switch-off for continuous reflection and saving of statistical data. With option for parametrisation and communication via optional, bidirectional remote control. Optionally for battery operation with battery compartment including 6 V lithium battery (CR-P2) per fitting for installation under the kitchen sink or for separate power supply via 6.75 V/12 V DC power supply unit or AQUA 3000 open system accessories. Battery compartment including battery or power supply unit with extension cable must be ordered separately.

Opis

Depressurised	yes
With filter	yes
Functional principle	manual
Hygiene flushing	prepared
Diameter nominal	DN 15
Locking mechanism	Top section, non-ceramic
Material fitting	stainless steel
Minimum flow pressure	1 bar
Type of mixing	yes
Pop-up waste set	no
With rosettes/cover plate	no
Spout	rotating, top
Spout projection	220 mm
Surface finish fitting	brushed
Temperature limit	yes
Thermal disinfection	yes
Type of mounting	tap hole
Type of operation	manual operation
Type of tap	pillar tap
Volume flow rate at 3 bar	0.08 l/s
Water connection	hose (gland nut)
Accent colour	none
Power supply connection	6,75 / 12 V DC / A3000 open
Power consumption	1.5 Voltampere
Protective system IP	59K

Specyfikacja techniczna

Nr referencyjny2030061065
Rodzina produktuTaps
Grupa produktuManual taps
TypObiekt (jeden obiekt)
Data publikacji2024-09-10
Numer edycji1
Wysokość (mm)392

Linki

Url produktuhttps://kwc-professional.com/en/f5lme_p2030061065
Instrukcja montażuhttps://stpkwcprodaks01.blob.core.windows.net/public/assets/products/2030061065/mounting-instruction_2030071017.pdf

Dodatkowe informacje

Materiał głównyStal nierdzewna
Zaprojektowano wNiemcy
Wyprodukowano wNiemcy
Waga netto (kg)3.8

Klasyfikacja

Kategoria BIMobjectKuchnia - Krany i baterie
Uniclass 2015 CodePr_40_20_87_84
Uniclass 2015 DescriptionSink taps

Dostępny w krajach:

Azja	Europa	Oceania	Ameryka północna	Afryka
Zjednoczone Emiraty Arabskie	Austria	Australia	Kanada	Republika Południowej Afryki
	Belgia		Stany Zjednoczone
	Chorwacja
	Czechy
	Estonia
	Finlandia
	Francja
	Hiszpania
	Holandia
	Irlandia
	Litwa
	Łotwa
	Luksemburg
	Niemcy
	Polska
	Rosja
	Rumunia
	Serbia
	Słowacja
	Słowenia
	Szwajcaria
	Szwecja
	Ukraina
	Węgry
	Wielka Brytania
	Włochy