Opublikuj swoje produkty

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

Watts LOCKSMITH™ Series CLS are 1.5 and 2 inch water softening systems offering simplex, duplex alternating, and 2, 3, or 4 tank progressive configurations. All systems are equipped with the Watts LOCKSMITH exclusive control valve which allows improved function through extensive programmable features. These pre-engineered systems are suitable for commercial applications ranging from 60,000 to 600,000 grains of hardness removal per tank and flow rates up to 119 gpm.

Opis

Features
- Watts LOCKSMITH exclusive controller for 1.5” and 2” systems
- Low salt alarm – Display alerts users when salt needs to be replenished
- Visual color screen for “at-a-glance” status
- Service contact screen – System alerts users when maintenance is required and provides dealer contact information
- Progressive mode – Link up to 4 softening systems together to operate in progressive mode with no additional control units required
- Remote regeneration – Supports remote regeneration input for automatic backwashing to increase softener efficiency
- Advanced programmable features including brine reclaim, AIO and more for optimal operation efficiency
- 2-12V relay outputs for increased configurability and ability to energize external equipment
- Extensive additional programmable capabilities

Specyfikacja techniczna

Nr referencyjnycls-water-softener
Rodzina produktuWater Quality & Rainwater Harvesting Solutions
Grupa produktuConditioning Solutions
TypObiekt (jeden obiekt)
Data publikacji2025-03-26
Numer edycji1

Linki

Dodatkowe informacje

Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectHydraulika - Hydraulika - pozostałe
Kod ETIMEC011732
Nazwa ETIMWater softener
UNSPSC namePackaged water treatment systems
UNSPSC code47101522
Uniclass 2015 CodeSs_55_70_98
Uniclass 2015 DescriptionWater treatment systems
CSI MasterFormat 2014 Code22 31 00
CSI MasterFormat 2014 TitleDomestic Water Softeners
OmniClass Number23-27 55 27 11
OmniClass TitleWater Softeners

Dostępny w krajach:

Ameryka północna
Kanada
Stany Zjednoczone

Podobne produkty

obraz dla Lead Free* Reduced Pressure Zone Assemblies - LF009

Watts Lead Free* Reduced Pressure Zone Assemblies - LF009

4.5 (33)

obraz dla Lead Free* Reduced Pressure Zone Assemblies, Cast Iron - LF909

Watts Lead Free* Reduced Pressure Zone Assemblies, Cast Iron - LF909

4.3 (11)

obraz dla 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

Watts 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

obraz dla Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

Watts Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

4.2 (12)

obraz dla Reduced Pressure Zone Assemblies - 009

Watts Reduced Pressure Zone Assemblies - 009

4.8 (18)

obraz dla Downspout Nozzle - RD-940

Watts Downspout Nozzle - RD-940

4.3 (15)

Common.Footer.ValueProp.Image.AltText

Aplikacja Design App dla Revit

Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

Pracuj bezpośrednio z obiektami BIM obok Revit
2 GB miejsca w chmurze — przechowuj zawartość Revit
Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit