Opublikuj swoje produkty

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Series 911, 911S Combination Fill Valve and Backflow Preventers are for use in commercial and residential hydronic heating systems to provide make-up water to the boiler, and prevent backflow when supply pressure falls below system pressure. It consists of a brass Watts Model 9D backflow preventer and a bronze Watts Model 1156F feed water pressure regulator in one pre-assembled unit. Model 911 has union NPT x NPT connections. Model 911S has union solder x NPT connections. The Series 911, 911S has a high capacity fill valve that provides quick system filling and purging. It is designed for use in the boiler feed lines of hydronic heating systems. Maximum Pressure: 100psi (6.9 bar).

Opis

Keywords: assembly, backflow, backflow preventer valve, backflow valve, bronze body, bypass, cast iron, check valve, cover, dcda, detector, double, double check, doublecheck, epoxy coated, meter, pex crimping tools, pex tools, pressure valve, pressure zone valve, preventer, reduced pressure valve, repairkit, replacement, rpza, shut-off, steam, steamtrap, trap, valve, vlv, watts regulator, plumbing, drains, drainage, reduce pressure zone assembly

Specyfikacja techniczna

Nr referencyjnyCombination-Fill-Valve-and-Backflow-Preventers-911
Rodzina produktuPlumbing & Flow Control Solutions
Grupa produktuHydronic & Steam Heating
TypObiekt (jeden obiekt)
Data publikacji2019-03-08
Numer edycji2

Linki

Dodatkowe informacje

Materiał głównyStal nierdzewna
Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectHydraulika - Zawory
Uniclass 2015 CodeAc_10_40_63
Uniclass 2015 DescriptionPipe fitting
CSI MasterFormat 2014 Code40 05 09
CSI MasterFormat 2014 TitleWall Pipes, Floor Pipes, and Pipe Sleeves
OmniClass Number23-27 43 00
OmniClass TitlePipe Fittings
CSI UniFormat II CodeC1030
CSI UniFormat II TitleFittings

Dostępny w krajach:

Ameryka północna
Kanada
Stany Zjednoczone

Podobne produkty

obraz dla Lead Free* Reduced Pressure Zone Assemblies - LF009

Watts Lead Free* Reduced Pressure Zone Assemblies - LF009

4.5 (33)

obraz dla 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

Watts 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

obraz dla Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

Watts Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

4.2 (12)

obraz dla Potable Water Expansion Tanks - PLT

Watts Potable Water Expansion Tanks - PLT

4.8 (18)

obraz dla Downspout Nozzle - RD-940

Watts Downspout Nozzle - RD-940

4.3 (15)

obraz dla Water Hammer Arrestors - 15M2

Watts Water Hammer Arrestors - 15M2

4.7 (21)

Common.Footer.ValueProp.Image.AltText

Aplikacja Design App dla Revit

Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

Pracuj bezpośrednio z obiektami BIM obok Revit
2 GB miejsca w chmurze — przechowuj zawartość Revit
Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit