Opublikuj swoje produkty
500XLYSBR Water Pressure Reducing Valve with Wye Strainer
500XLYSBR Water Pressure Reducing Valve with Wye Strainer
500XLYSBR Water Pressure Reducing Valve with Wye Strainer
    Wilkins

    500XLYSBR Water Pressure Reducing Valve with Wye Strainer

    The Pressure Reducing Valve shall be certified to NSF/ANSI/CAN 61, consisting of a low lead bronze body and bronze bell housing, a separate access cover for the plunger and a bolt to adjust the downstream pressure. The bronze bell housing and access cap shall be threaded to the body and shall not require the use of ferrous screws. The assembly shall be of the balanced piston design and shall reduce pressure in both flow and no-flow conditions. The assembly shall be accessible for maintenance without having to remove the body from the line. The Pressure Reducing Valve shall be a WILKINS Model 500XLYSBR.

    Compliance:

    • ASSE® Listed 1003 (1/2” thru 2 1/2”)
    • cUPC® Listed (1/2” thru 2”)
    • CSA® Certified B356 (1/2” thru 2”)
    • City of Los Angeles Approved (1/2” thru 2”)
    • Meets the requirements of NSF/ANSI/CAN 61 and 372*
    *(Less Than 0.25% Weighted Average Lead Content)

    Features:

    • Sizes 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3"
    • Maximum working water pressure: 300 psi
    • Maximum working water temperature: 140° F
    • Reduced pressure range: 25 psi to 75 psi
    • Factory preset: 50 psi
    • Threaded connections (FNPT): ANSI B1.20.1
    • Copper connections (FC): ANSI B16.22
    Opis
    • Wilkins model 500XLYSBR is designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The high flow capacity makes this device most suitable for industrial water lines and commercial water systems. The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.

      keywords: Emergency and Public Entrance Areas, and Grounds,Healthcare,Boiler/Mechanical Rooms,Retail,Custodial Closets,Office,Commercial,Boiler Rooms and Custodial Areas,Hospitality,Industrial,Janitorial Closets/Custodial Closets,Manufacturing Floor,Spill Containment Area/Wash Down Area,Commercial Turf,Irrigation,Drip Irrigation,Residential/Commercial Irrigation,Green House,School Systems,Educational Facilities,Universities,Government Buildings,High Rise Buildings,Military,Parking Deck,Sports Complex/Recreational Center,Parking Lots,Turf/Field/Track,Residential Multi-Family,Residential/Light Commercial,Landscaping,Residential Single-Family,Outdoor Kitchen,Correctional/Institutional,Architectural/Aesthetics,Development,Civil,Roads,Sidewalks,Highways,Transportation,Interstates,Toll Road,Distribution,Waterworks,Pump Stations,Food Service,Industrial/Processing Plant,Parking/Garages,Pressure Reducing Valves,Lead-Free Products,Zurn Wilkins Water Control,Power Generation,Zurn Wilkins Pressure Reducing Valves,CA Mandatory Water Reduction,Lead-Free Law Compliance,MasterSpec,Retrofit and Replacement,Water Conservation,Zurn Wilkins,00XLYSBR,0XLYSBR,strainer,12-500XLYSBR,34-500XLYSBR,1-500XLYSBR,114-500XLYSBR,112-500XLYSBR,2-500XLYSBR

    Specyfikacja techniczna
    • Nr referencyjny500XLYSBR
    • Rodzina produktuAdjusting/Controlling Valves for Liquid Services
    • Grupa produktuWater Pressure Reducing Valves
    • TypObiekt (jeden obiekt)
    • Data publikacji2026-08-25
    • Numer edycji1
    Dodatkowe informacje
    • Materiał głównyBrąz
    • Zaprojektowano wStany Zjednoczone
    Klasyfikacja
    • Kategoria BIMobjectHydraulika - Zawory

    Dostępny w krajach:

    Ameryka północna
    Anguilla
    Antigua i Barbuda
    Aruba
    Bahamy
    Barbados
    Belize
    Bermudy
    Brytyjskie Wyspy Dziewicze
    Curaçao
    Dominika
    Dominikana
    Grenada
    Grenlandia
    Gwadelupa
    Gwatemala
    Haiti
    Holandia Karaibska
    Honduras
    Jamajka
    Kajmany
    Kanada
    Kostaryka
    Kuba
    Martynika
    Meksyk
    Montserrat
    Nikaragua
    Panama
    Portoryko
    Saint Kitts i Nevis
    Saint Lucia
    Saint Martin
    Saint Vincent i Grenadyny
    Salwador
    Sint Maarten
    Stany Zjednoczone
    Trynidad i Tobago
    Turks i Caicos
    Wspólnota Saint-Barthélemy
    Wspólnota Terytorialna Saint Pierre i Miquelon
    Wyspy Dziewicze
    Common.Footer.ValueProp.Image.AltText

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit