Z874-12 Trench Drain System (USA Configurable)

Zurn Z874-12 Trench Drain System. High density polyethylene structural composite drain channel with 1.00 Percent bottom slope. All sections modular 80 inch lengths with interlocking ends and radiused bottom. Complete with heavy-duty Dura-Coated steel frame w/ anchor studs at surface, combination anchor tabs/leveling devices at appropriate locations and class C extra heavy-duty ductile iron grate-with 4 stainless steel lockdowns. USA Configurable

Model contains -U4 bottom outlets

Saves labor up to 75%
Rebar clips provided with system for elevation set
4-corner grate lock down for dynamic loading situations
Mechanical interlocking connections

Opis

ENGINEERING SPECIFICATION: Zurn Z874-12 Channels shall be 80" long, 17" wide reveal and have a 12" wide throat. Modular channel sections shall be made of 0% water absorbent High Density Polyethylene (HDPE). Shall have a positive mechanical connection between channel sections that will not separate during the installation and shall mechanically lock into the concrete surround every 10". Channels shall weigh less than 6.6 lbs. per linear foot, have smooth 3.5" radiused self cleaning bottom with a Manning's coefficient of .009 and 1.00% or neutral 0% built-in slope. Channels are available with inverts ranging from 9.25" to 34.21". Channel shall have all grates locked down. Channels come with clips attached to the frame to accommodate vertical re-bar for positioning and anchoring purposes. Shall be provided with the standard DGC grate, Zurn 16-1/4" wide Ductile Iron Slotted Grate, which locks down to the frame with 4 individual bolt anchors per grate. Ductile Iron conforms to ASTM specification A536-84, Grade 80-55-06. Ductile Iron grate is rated class C per the DIN EN1433 top load classifications. Supplied in 20" [508 mm] nominal lengths with 13/16" wide slots, and 1-3/4" bearing depth. Grate has an open area of 118 sq. in. per ft. [249779] sq. mm per meter]. The 1/4" thick Carbon Steel Frame Assembly conforms to ASTM specification A36 with 10 - 4" long concrete anchors per 80". The frame is supplied with a powder coated finish. All welds must be performed by a certified welder per ASTM standard AWS D1.1. Frames shall be produced in the USA.

Specyfikacja techniczna

Nr referencyjnyZ874-12
Rodzina produktuLinear Trench Drain Systems
Grupa produktuHDPE
TypObiekt (jeden obiekt)
Data publikacji2022-07-20
Numer edycji1
Szerokość (cale)17
Głębokość (cale)80

Linki

Url produktuhttps://www.zurn.com/products/drainage-interceptors/trench-drain-systems/linear-trench-drain/general-purpose-drainage-exterior/z874-12
Instrukcja montażuhttps://files.zurn.com/care-cleaning-install-warranty-sheets/ft754.pdf
Opis technicznyhttps://files.zurn.com/spec-sheets/z874-12.pdf

Dodatkowe informacje

Materiał głównyHigh-density polyethylene (HDPE)
Materiał dodatkowyDuctile Iron
Zaprojektowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectHydraulika - Drenaż
Klasyfikacja IFCObiekt
Uniclass 2015 CodePr_65_52_24_24
Uniclass 2015 DescriptionDrainage channels with gratings
CSI MasterFormat 2014 Code22 14 26.19
CSI MasterFormat 2014 TitleFacility Trench Drains
OmniClass Number23-39 29 13 19
OmniClass TitleSurface Water Drainage Systems
CSI UniFormat II CodeD20
CSI UniFormat II TitlePLUMBING

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze