Opublikuj swoje produkty
Z1202-N EZCarry® High Performance Adjustable Vertical Siphon Jet No-Hub Water Closet Carrier
Z1202-N EZCarry® High Performance Adjustable Vertical Siphon Jet No-Hub Water Closet Carrier
Z1202-N EZCarry® High Performance Adjustable Vertical Siphon Jet No-Hub Water Closet Carrier
Z1202-N EZCarry® High Performance Adjustable Vertical Siphon Jet No-Hub Water Closet Carrier
    Zurn

    Z1202-N EZCarry® High Performance Adjustable Vertical Siphon Jet No-Hub Water Closet Carrier

    4.0 z 5 gwiazdek4.0(5 recenzje)

    EZCarry® vertical siphon jet water closet carrier system with high performance waterway and 4” [102mm] no-hub connections. System includes Dura-Coated cast iron main fitting with hydro-mechanically optimized sweep and extended 2” [51mm] vent, adjustable gasketed faceplate, floor mounted pre-fab slotted foot supports with top anchoring pre-fab support base, heavyduty1/2” [13mm] rear anchor tie down, fixture bolts, trim, stud protectors, bonded “Neo-Seal” gasket, and corrosion resistant, adjustable 3” [76mm] dia. X 6” [152mm] coupling with integral test cap designed to increase flow velocity and line carry. EZCarry® system complies with the requirements of ASME A112.6.1M up to a 500 lbs [227 kg] static load rating.

    Features:

    • Propel waste up to three times farther, reducing the possibility of low-flow system clog for overall plumbing system protection
    • Protect facilities from excessive loading with standard system design for loading up to 500 lb.
    • Install faster with labor saving features on a 30% lighter system
    • Reduce maintenance emergencies with carriers designed to optimize waste line carry
    • Maintain a sanitary environment with wall-mounted fixture
    • Test the system and cut the coupling to length from the front with Zurn's patent-pending EZ-SET™ coupling option
    • Reduce adjustment time with factory-assembled trim and universal feet pre-set at 5-1/2" rough-in height

    Additional Models Available

    Z1202-N3 | Z1202-N3 (Floor Mount) | Z1202-N4 | Z1202-Ne (Floor Mount) | Z1202-N4-VL | Z1202-2N4 | Z1202-1NL4 | Z1202-1NR4 | Z1202-N4-FMBO

    Keywords: Closet,Carriers, EZCarry, Latest Product Launches, MasterSpec, EZCarry, Z1201-N, Z1201, closet, carrier,1201-N,201-N, Water Closet Carrier, EZCarry system, Vertical Siphon Jet, Siphon Jet, zurn water closet carrier, vertical water closet carrier, wall hung water closet carrier, jet carrier, carrier spec sheets, zurn carrier spec sheet, zurn toilet carriers, closet vertical

    Specyfikacja techniczna
    • Nr referencyjnyzurn-z1202-n4
    • Rodzina produktuCarriers & Fixture Supports
    • Grupa produktuWater Closet & Toilet Carriers
    • TypObiekt (jeden obiekt)
    • Data publikacji2018-08-02
    • Numer edycji3
    • Wysokość (cale)18
    Dodatkowe informacje
    • Materiał głównyŻeliwo
    • Zaprojektowano wStany Zjednoczone
    • Waga netto (lbs)73
    Klasyfikacja
    • Kategoria BIMobjectHydraulika - Drenaż
    • Klasyfikacja IFCObiekt
    • Uniclass 2015 CodePr_20_85_09_96
    • Uniclass 2015 DescriptionWall-hung WC support brackets
    • CSI MasterFormat 2014 Code22 42 13.13
    • CSI MasterFormat 2014 TitleCommercial Water Closets
    • OmniClass Number23-31 19 19
    • OmniClass TitleWater Closets 

    Dostępny w krajach:

    Ameryka północna
    Anguilla
    Antigua i Barbuda
    Aruba
    Bahamy
    Barbados
    Belize
    Bermudy
    Brytyjskie Wyspy Dziewicze
    Curaçao
    Dominika
    Dominikana
    Grenada
    Grenlandia
    Gwadelupa
    Gwatemala
    Haiti
    Holandia Karaibska
    Honduras
    Jamajka
    Kajmany
    Kanada
    Kostaryka
    Kuba
    Martynika
    Meksyk
    Montserrat
    Nikaragua
    Panama
    Portoryko
    Saint Kitts i Nevis
    Saint Lucia
    Saint Martin
    Saint Vincent i Grenadyny
    Salwador
    Sint Maarten
    Stany Zjednoczone
    Trynidad i Tobago
    Turks i Caicos
    Wspólnota Saint-Barthélemy
    Wspólnota Terytorialna Saint Pierre i Miquelon
    Wyspy Dziewicze
    Common.Footer.ValueProp.Image.AltText

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit