Publicar produtos
Solutions for Roof Waterproofing - Liquid Applied
Solutions for Roof Waterproofing - Liquid Applied
Solutions for Roof Waterproofing - Liquid Applied
Solutions for Roof Waterproofing - Liquid Applied
Solutions for Roof Waterproofing - Liquid Applied
Solutions for Roof Waterproofing - Liquid Applied
Solutions for Roof Waterproofing - Liquid Applied
    Sika
    Arquivado

    Solutions for Roof Waterproofing - Liquid Applied

    MasterSeal Roof systems form a fully bonded, seamless waterproofing membrane that avoids welds and seams that are typically the weaker spots in any waterproofing system. MasterSeal Roof systems can be installed on all types of substrates, including old concrete, existing bituminous sheets, sandwich panels, etc. MasterSeal Roof systems allow continuous and seamless application on pitched and on low sloped roofs containing, installations, joints, penetrations, roof vents, chimneys or any other detail. Resolution of detailing with liquid systems simplify the installation operations. Also leaking roofs, can be repaired in many cases without removing the old waterproofing layer. This offers clear time and cost savings and reduces the costs for disposal of old membranes. For more information, please contact your local Master Builders Solutions representative.
    Especificação
    • Roof waterproofing with MasterSeal Roof seamless system based on one coat of waterproof membrane MasterSeal M from Master Builders Solutions or similar approved. The system includes a specific primer which will be selected according the substrate and a UV resistant topcoat. The resolution of structural or movement joints with MasterSeal Roof systems will require spraying the membrane on a bond breaker installed on a joint sealant that reinforces the joint tightness. In the same way, the resolution of drains requires spraying the membrane with additional 20 - 30 % of consumption at least 40 cm around the drain perimeter. Lanterns, ventilation chimneys, roofvents, anchoring bases, mechanical fixings, surface mounted installations, etc, can have different configurations, but all of them will be completely treated by a continuous layer of the liquid waterproofing system. Corners and sharp angles on the substrate need to be rounded using PU sealants and the waterproofing system will be extended onto the vertical surface of the element a minimum 15 cm above the finishing level of the roof.
    Especificações técnicas
    • Ref.ª únicaMasterSeal_Roof_Liquid_Applied_Waterproofing
    • Familia de productoMBCC Group (Removed)
    • Grupo de produtosWaterproofing
    • TipoMostruário (modelo)
    • Data de publicação2024-04-01
    • Número de edição1
    Ligações
    Relacionado
    • Material principalPolyurea
    • Material secundárioPoliuretano
    • Concebido emGermany
    • Fabricado emGermany
    Classificação
    • Categoria BIMobjectMateriais de construção - Impermeabilização & Membranas
    • Classificação IFCTelhado
    • Uniclass 2015 CódigoEF_30_10
    • Uniclass 2015 DescriçãoRoofs
    • Código CSI MasterFormat 201407 56 00
    • Título CSI MasterFormat 2014Fluid-Applied Roofing
    • Número OmniClass23-13 39 31 15
    • Título OmniclassFluid Applied Roofing
    Common.Footer.ValueProp.Image.AltText

    Aplicação de design para Revit

    Carregue famílias diretamente no seu modelo Revit com um clique

    Tenha um local para acessar novos objetos com mais facilidade, armazenar suas famílias Revit e colaborar com sua equipe.

    • Marca de seleçãoTrabalhe diretamente com objetos BIM ao lado do Revit
    • Marca de seleção 2GB de armazenamento na nuvem - armazene o seu conteúdo Revit
    • Marca de seleção Obtenha LCA (A1-A3) de carbono incorporado diretamente do Revit