119 gallon storage tank
119 gallon storage tank

    119 gallon storage tank

    Residential glass-lined 119-gallon storage tank. The SANCO2 heat pump water heater system consists of two main components – a heat pump and a storage tank.

    Residential - The 4.5 kW heat pump is paired with a 43-, 83-, or 119-gallon storage tank, selected based on anticipated daily demand.

    Commercial - SANCO2 offers nine main storage tank models: 119, 200, 285, 360, 455, 505, 675, 860, and 1,000-gallon sizes.

    Specifikim
    • Construction
      The tank shall be manufactured from mild steel with
      a baked on Cobalt enriched porcelain glass lining
      Tank outer shell shall be steel with a baked on
      powder coating for protection
      The ECO-119GLBB Tank is only certified for Indoor
      installation, it should not be located external to the building
      Insulation
      2" of High R value foam insulation will be sprayed on to the
      bare shell of the tank to reduce heat loss
      Connections
      Connections to the Hot and Cold building supplies shall be
      1 1/2" NPT Female type
      Connections to the Hot and Cold piping to the Heat Pump
      shall be 3/4" NPT Female type
      Cold Water Piping from Storage Tank to Heat Pump
      and return of Hot Water piping from Heat Pump to Tank
      shall be 1/2" Copper or PEX.
      2 of 4" long 3/4" Male x 3/4" Male connections will be boxed
      which shall be located at the base of the ECO-119GLBB
      2 x Magnesium anode rods shall be installed internally
      Controls
      The tank shall be supplied with a Temperature sensor
      installed in a sensor well to control the GS5-45HPC & -D
      Additional GS Heat Pumps connected to a tank shall
      require an individual Temperature sensor
      Tank Sensor wiring to the GS Heat Pump will be 18-2AWG
      Two additional Thermowells are supplied with the Tank at
      the Top and Bottom levels of the Tank so that a Controller
      to provide Demand Response signals can be used
      Pressure and Temperature Relief
      Tank shall be supplied with a factory installed
      ASME certified Pressure and Temperature Relief valve
      Settings shall be at 150 Psig for Presssure and
      210°F for Temperature


    Specifikime teknike
    • Referencë unike119-gallon-storage-tank
    • Familja e produkteveResidential Tanks
    • Grupi i produkteveECO-119GLBB
    • LlojiObjekt (një objekt të vetëm)
    • Data e botimit2025-09-05
    • Numri i botimit1
    • Gjatësia (inçet)63.57
    • Gjerësia (inçet)28
    • Thellësisë (inçet)28
    Të ngjashme
    • Materiali kryesorCarbon Steel
    • Materiali dytësorGlass granulate
    • Projektuar nëShtetet e Bashkuara
    • Prodhuar nëShtetet e Bashkuara
    • Pesha Net (Lbs)345
    Klasifikimi
    • Kategoria BIMobjectPajisje hidraulike - Ngrohës uji
    • IFC classificationNgrohëse elektrike
    • Kodi ETIMEG000043
    • Emri ETIMResidential heating
    • Uniclass 2015 CodePr_60_60_96
    • Uniclass 2015 PërshkrimWater heaters
    • CSI MasterFormat 2014 Code22 33 36.16
    • CSI MasterFormat 2014 TitleCommercial Storage Electric Domestic Water Heaters
    • OmniClass Number23-31 29 00
    • OmniClass TitleHot Water Heaters

    Rajoni i disponueshëm

    North America
    Anguilla
    Antigua dhe Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Dominica
    El Salvador
    Grenada
    Grenlandë
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Ishujt e Virgjër Britanikë
    Ishujt e Virgjër të SHBA
    Ishujt Kajman
    Kanadë
    Karaibe Holandë
    Kolektiviteti i Shën Martinit
    Kosta Rika
    Kubë
    Kuraçao
    Martinique
    Meksikë
    Montserrat
    Nikaragua
    Panama
    Porto Riko
    Republika Domenikane
    Saint-Barthélemy
    Shën Kitts dhe Nevis
    Shën Lucia
    Shën Pierre dhe Miquelon
    Shën Vincent dhe Grenadinet
    Shtetet e Bashkuara
    Sint Maarten
    Trinidad dhe Tobago
    Turks dhe Caicos Islands
    Xhamaika