Model 1920FR, Vandal-Resistant Outdoor Freeze-Resistant Bottle Filler

Model 1920FR, Vandal-Resistant Outdoor Freeze-Resistant Bottle Filler

Model 1920FR vandal-resistant wall mounted freeze-resistant bottle filler uses a fully engineered pneumatic operated freeze-resistant valve assembly for continual use during winter months. It shall include stainless steel construction, a polished chrome-plated brass push-button which operates a pneumatic valve installed on the inside wall where room temperatures do not drop below 50° F (10° C), and self-draining water lines which protect the unit from freezing.

Satin stainless steel finish
Vandal resistant components include the button and bottom plate
Available steel wall mounting plate recommended
.75 gpm (2.8 L) Laminar flow
This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate.

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1".

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Certifications

NSF/ANSI/CAN 61-2020 with Q ≤ 1
CSA Certified

Specifikim

Model 1920FR vandal-resistant wall mounted freeze-resistant bottle filler can be a stand-alone wall mounted station, or mounted over the 1109FR and 1119FR series fountains. It shall include stainless steel construction, a polished chrome-plated brass vandal-resistant push-button operated by a pneumatic valve installed on the inside wall where room temperatures do not drop below 50° F (10° C), vandal-resistant bottom plate, and self-draining water lines which protect the unit from freezing. In extreme environments related to heat and cold, product(s) must be protected from damage/exposure due to these extreme conditions. This product requires a mounting plate; either the Haws model 6700 in-wall or the 6700R on-wall support plate. REQUIRES MODELS 1920FR & 6521FR PURCHASED SEPARATELY.

Specifikime teknike