LK Angle Wall Support ST 60 triple

For LK Angle Wall Bracket Grip. The Angle Wall support is available in two versions with a single perforated row c/c 60 mm alternatively double perforated row with c/c 60 mm in both directions. The Angle Wall Support has a reinforcement angle at the top and bottom which makes the Angle Wall Support very stable. The reinforcement angle can be cut and bent up by rule. On the reinforcement angle, you can mount LK Drain Clamp wall support ST RSK 188 26 94 to fix a 50 mm drain pipe, e.g. under the sink. The Angle Wall Support has countersunk holes for attachment to wooden and metal studs, which results in a low installation height. LK recommends plaster screws for wooden studs (e.g. Dahl art. no. 902005, Ahlsell art. no. 1531629) and lightweight construction screws for metal studs (e.g. Dahl art. no. 430352, Ahlsell art. no. 472735). Made from 1.25 mm surface-treated steel sheet.

ATTENTION! The wall rail must be supplemented with shorting or Våtrumsvägg 2012 (Säker Vatten wall).