Testing
- Tested per ANSI/SPRI/FM 4435/ES-1 Standard to comply with the International Building Code.
- Factory Mutual approved for wind uplift protection.
- Miami-Dade Approved (No. 23-0912.08 12/11/28) to comply with the “High Velocity Hurricane Zone of the Florida Building Code.”
Wind Warranty
The Lifetime, 215 MPH Anchor-Tite Wind Warranty is available on all Metal-Era manufactured Anchor-Tite products. It covers replacement or repair of any portion of the system that has failed due to a defect in Metal-Era supplied materials. The warranty covers the roof edge for the lifetime of the roof on which it was originally installed.
Finish Warranty
- 30-Year Kynar 500® Finish Warranty is included on coil-coated standard colors.
- Custom post-coated Kynar 500® colors are available with an included 10-Year Kynar 500® Finish Warranty or a 20-Year Kynar 500® Finish Warranty is available upon request.
- Anodized finishes come with a 5-year warranty (no warranty available for coil anodized finishing; Post-coat/Class 1 Batch Anodized is available with a 5-year warranty with an option to increase to a 10-year warranty for an upcharge).
- Please email Technical Services regarding pricing for Anodized finishes.
Standard Sizes
Cover Materials
- 24 ga steel
- 22 ga steel
- .040" aluminum
Colors
Choose from a wide range of standard colors and finishes that meet your job requirements.
Efficient Design
- Provided in 12'-0" lengths with pre-punched holes for quicker installation and lower labor costs.
- The fastening holes are slotted to allow for proper thermal movement of the materials and ensure correct fastener placement and spacing.
- Low profile roof flange allows for water drainage as needed for drip edge conditions.
- Factory fabricated miters provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
- All splice plates and fasteners are included and will arrive to the job site with the product.
- The patented, extruded aluminum anchor bar securely terminates the membrane. This provides protection unlike any other manufactured or shop-fabricated edge. The anchor bar is readily available to dry-in the roof structure.
- Radius and specially fabricated products are available to meet the unique needs of each project.
- When reroofing, the anchor bar can be removed, cleaned and reinstalled at any time without compromising its strength and appearance.
- Watertight Non-penetrating design eliminates the need for stripping-in or heat welding that is typical of many other roof edge designs. Watertight integrity is not compromised by improper flashing procedures, failed adhesives or lap sealants.
Competitively Priced
- The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
