Ashby Ceiling Loudspeakers

The Ashby’s dual-driver concentric configuration offers accuracy and fidelity over a full range: Experience it all, from crystal-clear speech to music’s sparkling highs and rich bass.

Features & Benefits

Self-powered
Easy to install
Extremely wide and consistent coverage
Ultra low distortion
Exceptional SPL-to-size ratio
Beautiful low frequency response and reproduction of speech and music
Supports long cable runs with light-gauge cablesOne MPS-488HP can power up to 16 Ashby-8Cs

Applications

Distributed systems for music and paging that demand high-quality audio and vocal intelligibility
Constellation acoustic systems

Specifikim

Ceiling Loudspeaker: Ashby 5C
The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).
Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).
The loudspeaker shall be the Meyer Sound Ashby-5C
Ceiling Loudspeaker: Ashby 8C
The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.
The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).
Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).
The loudspeaker shall be the Meyer Sound Ashby-8C.
Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

Specifikime teknike

Referencë unikemeyersound-ashby
Familja e produkteveLoudspeakers
Grupi i produktevePoint Source
LlojiObjekt (një objekt të vetëm)
Data e botimit2020-03-12
Numri i botimit2

Lidhje

Product URLhttps://meyersound.com/product/ashby/
Udhezime instalimihttps://meyersound.com/download/ashby-operating-instructions/?wpdmdl=10918&masterkey=59fbc40103189
Certifikimet e produktevehttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc
Përshkrimet teknikehttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc

Të ngjashme

Materiali kryesorAlumin
Projektuar nëShtetet e Bashkuara
Prodhuar nëShtetet e Bashkuara

Klasifikimi

Kategoria BIMobjectElektronikë - Audio
IFC classificationObjekt
Uniclass 2015 CodePr_70_75_36_50
Uniclass 2015 PërshkrimLoudspeakers
CSI MasterFormat 2014 Code27 24 23
CSI MasterFormat 2014 TitleAudio-Video Devices
OmniClass Number23-37 15 29 11 13
OmniClass TitleLoudspeakers

Rajoni i disponueshëm

Europe	Asia	North America	Africa	South America	Oceania
Andorrë	Afganistan	Anguilë	Afrika e Jugut	Argjentinë	Australi
Austri	Arabia Saudite	Antigua dhe Barbuda	Algjeri	Bolivi	Fixhi
Belgjikë	Armeni	Arubë	Angolë	Brazil	Guam
Bjellorusi	Azerbaixhan	Bahamas	Benin	Ekuador	Ishujt Cook
Bosnjë dhe Hercegovinë	Bahrejn	Barbados	Botsvanë	Guajanë	Ishujt Marshall
Bulgari	Bangladesh	Belizë	Burkina-Faso	Guiana franceze	Ishujt Minor Periferik të Shteteve të Bashkuara
Danimarkë	Brunei	Bermude	Burundi	Ishujt Falkland (Islas Malvinas)	Ishujt Pitcairn
Estoni	Butan	Dominikë	Çad	Kili	Ishujt Solomon
Finlandë	Emiratet e Bashkuara Arabe	Granadë	Côte d’Ivoire	Kolumbi	Ishujt Veriore të Marianës
Francë	Filipinet	Grenlandë	Egjipt	Paraguaj	Ishulli Norfolk
Gërnzi	Gjeorgji	Guadelupë	Eritre	Peru	Kaledonia e Re
Gjermani	Hong-Kong	Guatemalë	Esvatini	Surinami	Kiribati
Gjibraltar	Indi	Haiti	Etiopi	Uruguai	Nauru
Greqi	Indonezi	Honduras	Gabon	Venezuelë	Niue
Holandë	Ishujt Cocos (Keeling)	Ishujt e Virgjër Britanikë	Gambia		Palau
Hungari	Izrael	Ishujt e Virgjër të SHBA	Gana		Papua Guinea e Re
Irlandë	Japoni	Ishujt Kajman	Guine		Polinezia franceze
Ishujt Alandë	Jemen	Kanadë	Guine-Bisau		Samoa
Ishujt Faroe	Jordani	Karaibe Holandë	Guinea Ekuatoriale		Samoa amerikane
Ishulli i Njeriut	Kamboxhi	Kolektiviteti i Shën Martinit	Kamerun		Shtetet Federale të Mikronezisë
Islandë	Katar	Kosta Rika	Kenia		Timor-Leste
Itali	Kazahstan	Kubë	Kepi i Gjelbër		Tokelau
Kroacia	Kinë	Kuraçao	Komora		Tonga
Letoni	Kirgistan	Martinikë	Lesoto		Tuvalu
Lihtenshtajn	Korea e jugut	Meksikë	Liberi		Vanuatu
Lituani	Korea e Veriut	Montserat	Libi		Wallis dhe Futuna
Luksemburg	Krishtlindje Island	Nikaragua	Madagaskar		Zelanda e Re
Mali i Zi	Kuveit	Panama	Majotë
Maltë	Laos	Porto Riko	Malavi
Maqedonia e Veriut	Liban	Republika Domenikane	Mali
Mbretëria e Bashkuar	Makao	Salvador	Marok
Moldovë	Malazi	Sen-Bartelemi	Mauritius
Monako	Maldive	Shën Kitts dhe Nevis	Mavritani
Norvegji	Mianmar (Burmë)	Shën Lucia	Mozambik
Poloni	Mongoli	Shën Pierre dhe Miquelon	Namibi
Portugali	Neoal	Shën Vincent dhe Grenadinet	Niger
Qipro	Oman	Shtetet e Bashkuara	Nigeri
Qyteti i Vatikanit	Pakistan	Sint-Marten	Republika Demokratike e Kongos
Republika Çeke	Palestinë	Trinidad dhe Tobago	Republika e Afrikës Qendrore
Rumani	Singapor	Turks dhe Caicos Islands	Republika e Kongos
Rusi	Siria	Xhamaika	Reunion
San-Marino	Sri-Lankë		Ruandë
Serbi	Tajlandë		Sahara Perëndimore
Shqipëri	Tajvan		São Tomé dhe Príncipe
Sllovaki	Taxhikistan		Sejshelle
Sllovenia	Territori Britanik i Oqeanit Indian		Senegal
Spanjë	Turkmenistan		Shën Helena
Suedi	Turqi		Sierra-Leone
Svalbard dhe Jan Mayen	Uzbekistan		Somali
Ukrainë	Vietnam		Sudan
Xhersej			Sudanin Jugor
Zvicër			Tanzani
			Togo
			Tunizi
			Ugandë
			Xhibuti
			Zambi
			Zimbabve