Electric cable connection kit NF C15-100
Electric cable connection kit NF C15-100
    Nexans

    Electric cable connection kit NF C15-100

    The NEXANS EV NETWORK (Electric Vehicle) solution has been specially designed to supply Electric Vehicle Charging Infrastructures (EVCI) in covered car parks. Its design allows a quick connection of charging stations through branch cables.

    The NEXANS EV-NETWORK solution provides several advantages compared to the individual cabling of each charging station:

    • modularity and scalability of the installation,
    • space-saving in the switchboard, in cable trays, core drilling
    • cost-effective, with reduced cable length and easiest maintenance

    Cables comply with the requirements of the Construction Products Regulation “CPR (EU) n° 305/2011” with an improved fire performance class: Cca - s1, d1, a1. They are fire retardant and low fire hazard cables, with low smoke and reduced emissions of toxic and corrosive gasses (LS0H).

    Specifikim
    • Construction

      The NEXANS EV-NETWORK connection kit NF C15-100 is made of:

      Branch cables to connect, simultaneously or later, the charging stations to the BUS cable via dedicated connectors - FRN1X1G1 AR ou FRN1X1G1 type of cables >= 16mm² Cu or >=25mm² Al for 7,4 kW et 22 kW.

      • 2 single core cables - 25 mm² (mono)
      • 3 single core cables - 25 mm² (tri)

      Connectors
      : These connectors are used in installations serving electric vehicle charging infrastructures installed in car parks to connect individual branches to the collective horizontal conduit in the car park. Phase, neutral and PE connector + terminal insulation of the branch

      • GE003 KIT MONO CONNECTEURS IRVE 50-70
      • GE005 KIT TRI CONNECTEURS IRVE 50-70

      Terminations
      : these kits are used to connect the end of the main cable. They provide a protection type class II and consist of 5 cold-shrink caps (4 for the conductors and 1 covering the whole assembly to provide double insulation). A strip of mastic provides a perfect seal.

      • GE010 KIT EXTREMITE IRVE 50-70
      • GE011 KIT EXTREMITE IRVE 50-150

      Insulated conductors VK
      - 16mm² at minimum for 7,4 kW et 22 kW

      Connection Box
      - Box type IP65 IK07 installed:

      • Height ≥ 0,90m
      • Height ≥ 1,50m
      • On wall, pole or cable trays
      Specifikime teknike
      • Referencë unikeelectric_cable_connection_kit_according_to_nf_c15_100
      • LlojiAssembly (objekte të shumëfishta)
      • Data e botimit2025-08-21
      • Numri i botimit1
      Të ngjashme
      • Materiali kryesorAlumin
      • Materiali dytësorPolymer
      • Projektuar nëFrancë
      • Prodhuar nëFrancë
      Klasifikimi
      • Kategoria BIMobjectElektrike - Electric cables
      • IFC classificationSegmenti i kabllit
      • Kodi ETIMEG000001
      • Emri ETIMCables
      • Uniclass 2015 CodePr_65_70_48
      • Uniclass 2015 PërshkrimLow voltage cables
      • OmniClass Number23-13 23 21 15
      • OmniClass TitleCables

      Rajoni i disponueshëm

      Europe
      Francë
      Common.Footer.ValueProp.Image.AltText

      Aplikacion dizajnimi për Revit

      Ngarkoni familjet direkt në modelin tuaj Revit me një klik të vetëm

      Merrni një vend për të hyrë më lehtë në objekte të reja, ruani familjet tuaja Revit dhe bashkëpunoni me ekipin tuaj.

      • Shenjë টিকPunoni drejtpërdrejt me objekte BIM pranë Revit
      • Shenjë টিক 2 GB hapësirë ruajtje në Cloud - ruani përmbajtjen tuaj Revit
      • Shenjë টিক Merrni LCA e karbonit të mishëruar (A1-A3) direkt nga Revit