Linear® DOUBLE

 DOUBLE PROTEK LINEAR® FOR PLASTER

Metal pocket frame in high-strength galvanized sheet metal and anodized extruded aluminum model PROTEK LINEAR® DOUBLE, including a special rhomboid mesh (non-welded) plaster-holder net with inclined weft, pre-assembled on ribbed sheet metal horizontally every 100 mm to obtain the " spoon ”of the plaster, favoring the speed of laying and the uniform retention of the plaster over the entire surface.

Uprights on the entrance side of the body, upper crossbars and guides in anodized aluminum to ensure high resistance to oxidation and adhesion of the wall paints. Uprights and upper crosspieces with knurled surfaces for better adhesion of the plaster.

With 69/89 mm structure for internal partition wall made of 8/10 cm perforated bricks with an overall finished wall thickness (PF) of 105/125 mm. Suitable for housing inside two opposing sliding doors, rigid, retractable, with a maximum unit weight of 120 kg without the application of jambs and architraves.

 Doorway dimensions: L mm ………………. X H mm .................. X PF mm ..................

 PROTEK LINEAR® DOUBLE FOR PLASTERBOARD

Metal pocket frame in high-strength galvanized sheet metal and anodized extruded aluminum model PROTEK LINEAR® DOUBLE, with side panels ribbed horizontally every 100 mm to completely close the body. Stop upright, front panel, uprights at the entrance to the body, upper crosspieces and anodized aluminum guide to ensure high resistance to oxidation and adhesion of the wall paints. Stop upright and front panel with interlocking assembly (no screws, no caps). Shaped uprights and upper crosspieces with stops facilitating the fixing of the plasterboard sheets and knurls for optimal grip of the stucco or plaster.

With 57 mm structure for internal plasterboard partition wall formed by 75/100 mm profiles with total finished wall thickness (PF) of 100/125 mm, with the use of single / double slab.

Suitable for housing inside a sliding, rigid door with a maximum weight of 120 kg without the application of jambs and architraves.

 Doorway dimensions: L mm ………………. X H mm .................. X PF mm ..................