Proline T glazing

Profile system

• Modular, non-insulated, slide-and-turn system in two profile heights:
  • Proline T: 39 mm
  • Proline T Mega: 60 mm
• Top-running, for high load support
• Edged profiling
• No visible profile in the panel butt joint
• Linear glass pane glued into the aluminium profiles at the top and bottom and form-fitted into place using connectors. No glass/aluminium contact
• Controlled, concealed drainage in the panel and frame, frost-proof
• Element suspended from top horizontal profiles and guided along bottom horizontal profiles using running mechanisms
• Top running track available with height adjustment profile; height adjustment profile with fixing bracket available as alternative
• Choice of horizontal bottom guide profiles:
  • Guide rail with or without fixing bracket
  • Flat floor track (accessible)
• Adjustable vertical frame (+ 15 mm on each side)
• Height adjustment of up to 16 mm (or up to 32 mm in special versions), with point-by-point adjustment options to compensate for uneven surfaces
• Grey and black weather-resistant polyamide end caps on horizontal panel profile
• Separate levels for runners and locks
• Concealed closing monitor can be installed Sealing system
• The top and bottom seal runs horizontally between the panel and frame in two sealing levels with constant crack dimensions
• The sealing levels are not interrupted by fittings Design variants
• Sliding panel can be pushed to the left and/or right towards the opening position and swings inwards or outwards to open
• Angled systems and all-glass corners can be implemented, and segmented ground plans are possible
•  Swing, sliding, flush and fixed panels can be combined in one frame and the same floor track 
• Separate swing panels possible as access for second emergency exit route
• Floor track design without rebate in compliance with German standard DIN 18040 on ‘Construction of accessible buildings’
• Optional variants for improved sound insulation

Sealing system

• The top and bottom seal runs horizontally between the panel and frame in two sealing levels with constant crack dimensions
• The sealing levels are not interrupted by fittings 

Design variants

• Sliding panel can be pushed to the left and/or right towards the opening position and swings inwards or outwards to open
• Angled systems and all-glass corners can be implemented, and segmented ground plans are possible
• Swing, sliding, flush and fixed panels can be combined in one frame and the same floor track
• Separate swing panels possible as access for second emergency exit route
• Floor track design without rebate in compliance with German standard DIN 18040 on ‘Construction of accessible buildings’
• Optional variants for improved sound insulation

Fittings

• Fittings concealed in profiles
• Fittings with one-hand operation in profiles
• Range of locking options for the swing panel (cable, double rotating knob, handle)
• Magnetic door stay for swing panel
• Slim-line panel catches
• Safeguard at second panel cleanout to prevent incorrect operation
• Salt spray test in accordance with DIN ISO 9227 NSS

Product certificates

• ETA
• CE mark for all opening system configurations. Analyses provided on an individual basis per building project