Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
    Wilkins

    Wilkins 950XL3 Double Check Valve, 3/4" - 2"

    Ideal for use where Lead-Free* valves are required. Designed for installation on potable water lines to protect against both backsiphonage and backpressure of polluted water into the potable water supply. Assembly shall provide protection where a potential non-health hazard exists

    Compliance (Horizontal and Vertical)

    • ASSE® Listed 1015, Horizontal and Vertical Up
    • cUPC® Listed
    • CSA® Certified B64.5, Horizontal and Vertical Up
    • AWWA Compliant C510
    • UL® Classified (less shut-off valves)
    • C-UL® Classified
    • Approved by the Foundation for Cross Connection
    Control and Hydraulic Research at the University of
    Southern California
    • Meets the requirements of NSF/ANSI/CAN 61 and 372*
    *(Less than 0.25% Weighted Average Lead Content

    Features:

      • Compact and shortest bronze small backflow valve on the market allowing for installation versatility
      • All-bronze body ensures durability against the elements, with a Noryl®* check body and stainless-steel fasteners to resist corrosion over time.
      • EZSWAP® modular check with top access speeds up repairs and replacements
      • Test ports located on valve’s centerline make install and testing easy
      • Interlocking connected checks provide ¼ turn to access and disassemble.
      • Low-cost repair kits extend the lifespan at a significantly lower cost
      • Lead Free* (0.25% max. weighted average lead content)
      • ASSE Listed, UPC® Listed, Meets NSF/ANSI/CAN 61 & 372 requirements; Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California; Safe Drinking Water Act Compliant


        Specifikim
        • The Double Check Type Backflow Preventer shall be certified to NSF/ANSI/CAN 61, shall be ASSE Listed 1015, rated to 180°F, and supplied with full port ball valves. The main body and access cover shall be low lead bronze (ASTM B 584), the seat ring and all internal polymers shall be Noryl™ and the seat disc elastomers shall be silicone. The first and second check shall be located at an angle and accessible for maintenance from the top of the device, without removing the device from the line. The checks shall share a single access cover and test cocksshall be accessible from the top of the device. The Double Check Type Backflow Preventer shall be a ZURN
          WILKINS Model 950XL3

          Keywords:Thermal expansion tank,pressure relief valves,Double Check Backflow Preventer,backsiphonage,Cross Connection Control,double check valve backflow preventer,shut-off valves,water thermal expansion,Double Check Backflow Assembly,cartridge assembly,inlet shut-off valve,EZSwap,shock arresters, 112-950XL3,114-950XL3,1-950XL3,2-950XL3,34-950XL3

        Specifikime teknike
        • Referencë unikezurn-950xl3
        • Familja e produkteveBackflow Preventers
        • Grupi i produkteveReduced Pressure Principle Assembly
        • LlojiObjekt (një objekt të vetëm)
        • Data e botimit2025-09-02
        • Numri i botimit1
        Të ngjashme
        • Materiali kryesorBronze
        • Projektuar nëShtetet e Bashkuara
        Klasifikimi
        • Kategoria BIMobjectPajisje hidraulike - Valvul
        • IFC classificationValvul
        • Uniclass 2015 CodePr_65_54_94_72
        • Uniclass 2015 PërshkrimReduced pressure zone valves
        • CSI MasterFormat 2014 Code40 05 67
        • CSI MasterFormat 2014 TitleSpecialized Pressure and Flow-Control Valves
        • OmniClass Number23-27 31 47
        • OmniClass TitlePressure Regulating Valves

        Rajoni i disponueshëm

        North America
        Anguilla
        Antigua dhe Barbuda
        Aruba
        Bahamas
        Barbados
        Belize
        Bermuda
        Dominica
        El Salvador
        Grenada
        Grenlandë
        Guadeloupe
        Guatemala
        Haiti
        Honduras
        Ishujt e Virgjër Britanikë
        Ishujt e Virgjër të SHBA
        Ishujt Kajman
        Kanadë
        Karaibe Holandë
        Kolektiviteti i Shën Martinit
        Kosta Rika
        Kubë
        Kuraçao
        Martinique
        Meksikë
        Montserrat
        Nikaragua
        Panama
        Porto Riko
        Republika Domenikane
        Saint-Barthélemy
        Shën Kitts dhe Nevis
        Shën Lucia
        Shën Pierre dhe Miquelon
        Shën Vincent dhe Grenadinet
        Shtetet e Bashkuara
        Sint Maarten
        Trinidad dhe Tobago
        Turks dhe Caicos Islands
        Xhamaika
        Biblioteka e produkteve BIMobject

        Aplikacion dizajnimi për Revit

        Ngarkoni familjet direkt në modelin tuaj Revit me një klik të vetëm

        Merrni një vend për të hyrë më lehtë në objekte të reja, ruani familjet tuaja Revit dhe bashkëpunoni me ekipin tuaj.

        • Shenjë টিকPunoni drejtpërdrejt me objekte BIM pranë Revit
        • Shenjë টিক 2 GB hapësirë ruajtje në Cloud - ruani përmbajtjen tuaj Revit
        • Shenjë টিক Merrni LCA e karbonit të mishëruar (A1-A3) direkt nga Revit