Duke përdorur shërbimet tona ju pranoni përdorimin tonë të kukit ketu !

Jam dakort

CH Ytong Thermobloc 425 + Insulation render U=0,17 W/(m²K) d=473 mm

Ref. unike: COM_CH_Y_Thermobloc_425_U_0-17_d_473
Markë: Ytong
Familja e produktit: Ytong AAC
Grupi i produkteve: Composite
Gjersia (mm): 1000
Lartësi (mm): 1000
Thellsia (mm): 473
Data e publikimit: 2018-03-19
Numri i botimeve: 1
Lloj: Objekt (një objekt të vetëm)
Shkarko (11)
The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures.
The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use.

- Thermal conductivity from λ = 0.08 W/(mK)
- Homogeneous, monolithic - without additional insulation
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing

Construction - U = 0,17 W/(m²K):

- 10 mm Multipor lightweight mortar as internal plastering - GTIN: 4054649000590
- 425 mm Ytong Thermobloc 08 - GTIN: 4054640031784
- 20 mm insulation render (e.g. Hagatherm insulation render)
- 15 mm reinforced leveling mortar (e.g. Haga leveling render)
- 3 mm facing render (e.g. Hagasit Bio finishing)

The planning and execution of the masonry must take account of the cantonal building regulations and building laws (for example MuKEn), the corresponding standards of the SIA, as well as statutory and private law requirements (the law of obligations).

Technical characteristics of the Ytong masonry:
Dry bulk density: ρ = 325 kg/m³
Characteristic masonry compressive strength: fxk = 1.80 N/mm²
Design value of masonry compressive strength: fxd = 0.90 N/ mm²
Characteristic masonry bending tensile strength ffxk = 0.15 N/mm²
Characteristic shear modulus of the masonry: Gk = 0.72 kN/mm²
Design value of the modulus of elasticity: Exd = 0.90 kN/mm²
Calculated thermal conductivity λ = 0.08 W/(mK)
Heat storage capacity c = 1000 J/kg K
Weighted sound reduction index (masonry unplastered) Rw = 50 dB
Fire resistance class REI-M 180

The present tool supports you in the planning of masonry made of Ytong Thermoblocks, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must be conform to local regulations. The use of the object must therefore be verified independently.

Materiali kryesor: Aerated concrete
Materiali i mesëm: Plaster
Projektuar në: Switzerland
Prodhuar në: Germany

Kategoritë BIMobject: Muret - Muret e jashtme
IFC klasifikim: Wall
Emri i UNSPSC: Bricks
Kodi i UNSPSC: 301316
Uniclass 1.4 Kod: L83122
Uniclass 1.4 Përshkrimi: Wall units
Uniclass 2.0 Kod: SS-25-13-50
Uniclass 2.0 Përshkrimi: Masonry Wall Systems
Uniclass 2015 Kod: Ss_25_13_50
Uniclass 2015 Përshkrimi: Masonry wall systems
NBS Reference Kod: 25-13-50
NBS Reference Përshkrimi: Masonry Wall Systems
CSI MasterFormat 2014 Code: 04 22 26
CSI MasterFormat 2014 Title: Autoclaved Aerated Concrete Unit Masonry
OmniClass Numër: 23-13 35 21 13
OmniClass Titull: Masonry Structural Walls
CSI UniFormat II Code: B2010
CSI UniFormat II Title: Exterior Walls
Ky produkt është në dispozicion në:
  • Switzerland

BIMobject SEEK Properties

Walls - External Walls

Emri Vlerë
Depth 473
Insulation Thickness 425 mm
Insulation Type Ytong AAC (Autoclaved Aerated Concrete)
Intended Function Monolithic exterior wall
Material Ytong AAC (Autoclaved Aerated Concrete)
Width 473 mm




This property set allows objects to be COBie UK BIM Level 2 classified

Emri Vlerë
Material Ytong AAC (Autoclaved Aerated Concrete)