Mill House with Crank Handle Pump and Mill Wheel | Playground Equipment | Water Play House

Technical information

Equipment made of non-impregnated mountain larch

Core-free
Sawn-timbers core-free, thus decreasing occurrences of cracking and undesired changes in shape

Claddings
Claddings made of mountain larch (4 - 5 cm). Peeled white by hand, natural tree surface remains tangible and perceptible

Plywood
Plywood made of mountain larch, three-layer (3 cm) or five-layer (4 cm). High dimensional stability, waterproof, glued according to DIN EN 13353:2011

Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel

Floor of 25 mm tongue and groove boards. Steps of stairs made of hardwood, 32 mm.

Mill Wheel
Equipment made of non-impregnated mountain larch

Roller bearings
High-quality roller bearings made of chrome steel or stainless steel for rotating elements, easy to maintain and exchange, sealed

Craftsman-like water wheel construction with grooved and slitted wood connections. Shaft, hub and hoop made of stainless steel, glass bead blasted.

Crank Handle Pump
Crank handle pump with extended run-out. Closed piston suction pump; pump made of stainless steel; cylinder and crank housing, mounting plate, piston rod and drive shaft made of stainless steel; the drive shaft brass bearing is replaceable, fitted with nipple for lubrication; cylinder with a liner made of brass alloy and plastic piston (POM); crank ring made of stainless steel, knob made of plastic material; the valve combination installed in the pump connection box for direct connection to mains water Ø 1 inch and a shut-off valve with backflow preventer (type EA) and drainage; external thread 1 inch; min. 2.5 bar water pressure, max. 6 bar; relief valve prevents backflow, water requirement approx. 18 l/min.

• Height: 2.50 m
• Height floor: 0.60 m
• Length: 2.45 m
• Width: 3.45 m
• Weight: approx. 710 kg

Installation information

Surfacing requirements
Corresponding to a fall height of ≤ 0.60 m

Foundations

• 4 items: 50 x 50 x 40 cm, excavation depth 60 cm
• 1 item: 30 x 70 x 20 cm, excavation depth 40 cm
• 1 item: 90 x 50 x 50 cm, excavation depth 70 cm

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.