Floor Access Door Models Type FT-30

Guide Specifications

• Material: 1/4" (6mm) aluminum cover and extruded aluminum frame
• Cover: Diamond-pattern tread plate reinforced for H-20 wheel loading. Designed for installation in off street locations where the door is not subjected to high density, fast moving traffic. Structural calculations available upon requested. Optional Thermion Safetrax non-skid cover finish available.
• Frame: Extruded aluminum with bend down anchor tabs around the perimeter. Extrusion is designed with a water retention lip to keep standing water from falling into the opening.
• Gasket: EPDM gasket adhesive bonded around the entire perimeter of the cover.
• Hinges: Aluminum hinges welded to the cover and frame with 1/4" (6 mm) type 316 stainless steel hinge pins.
• Locking mechanism: Each door will be equipped with a minimum of 2 lever type lock assemblies to compress the gasket to provide a flood tight seal. Each lock is engaged by turning a hex head bolt from the topside of the door.
• Lift Assistance: Type 316 stainless steel gas spring operator(s) with built-in hold open device.
• Finish: Mill Finish aluminum with a bituminous coating applied to the exterior of the frame
• Hardware: Type 316 stainless steel throughout.