เผยแพร่สินค้าของคุณ
Wall-hung boiler  VICTRIX PRO 180 V2 EU
Wall-hung boiler  VICTRIX PRO 180 V2 EU
Wall-hung boiler  VICTRIX PRO 180 V2 EU
Wall-hung boiler  VICTRIX PRO 180 V2 EU
Wall-hung boiler  VICTRIX PRO 180 V2 EU
Wall-hung boiler  VICTRIX PRO 180 V2 EU
    IMMERGAS

    Wall-hung boiler VICTRIX PRO 180 V2 EU

    High-power, wall-hung condensing boiler for heating only. Designed for professional plant rooms, it guarantees high performance with reduced consumption thanks to a wide modulation range up to 1:5 for VICTRIX PRO 150 V2 EU. Compact and linear design featuring a vertical sliding door to protect the electronic control panel. Suitable for floor-standing installations using a specific modular support frame for self-supporting configurations. The standard control electronics allow the management of cascade systems up to 5 boilers, utilizing advanced thermoregulation logic for maximum system flexibility. IPX5D electrical protection rating and standard anti-freeze kit down to -5 °C for outdoor installations, even in unsheltered areas via a dedicated cabinet. The engineering of VICTRIX PRO V2 drastically reduces environmental impact, positioning it in the prestigious eco-friendly Class 6, the highest category for limiting polluting emissions. The new VICTRIX PRO V2 can operate with natural gas, LPG, and hydrogen blends up to 20%.
    สเปคสินค้า
    • Wall-hung, room-sealed, fan-assisted premix condensing modules, featuring high efficiency and forced circulation with variable heat outputs. The generators are certified for installation both in plant rooms and outdoors (with specific protection for unsheltered installations), and can be used in either room-sealed fan-assisted or open-flue fan-assisted configurations. The module consists of: • a total premix combustion system with a cylindrical multigas steel burner, complete with ignition electrodes and an ionization control electrode; • a primary gas/water heat exchanger with a composite casing, including an air vent valve and an internal stainless steel coil; • a stainless steel combustion chamber internally insulated with ceramic panels; • an electronically variable-speed flue gas exhaust fan and a flue gas probe; • a condensate disposal circuit including a siphon and a flexible drain pipe; • a hydraulic group consisting of a flow manifold, a primary circuit pressure transducer, and a low-consumption modulating circulation pump; • a 4-bar system safety valve and a standard discharge funnel; • an overtemperature water safety thermostat; • an electronic board with continuous flame modulation, 1:10 modulation range; • a system flow and return regulation probe, heating flow temperature from 20 to 85 °C; • an IPX5D electrical protection rating, with the possibility of outdoor installation under an additional cover (unsheltered); • standard anti-freeze protection down to -5 °C (-15 °C with a specific optional kit); • pre-arrangement for cascade operation (up to 5 generators with a single safety kit); • possibility of installation using a free-standing support frame kit, suitable for installing one or more VICTRIX PRO V2 units; • possibility of installing the generator inside a cabinet suitable for unsheltered outdoor installation; • possibility of connecting to a remote system management system (optional), when paired with the cascade and zone controller; • compatible with the Ø 80 mm flexible chimney lining system (single installation).
    สเปคสินค้าด้านเทคนิค
    • Unique ref.VICTRIXPRO180V2EU
    • ประเภทวัตถุ (วัตถุชิ้นเดียว)
    • วันที่เผยเเพร่2026-06-30
    • หมายเลขฉบับ1
    • สูง (มิลลิเมตร)1098
    • กว้าง (มิลลิเมตร)600
    • ความลึก (มิลลิเมตร)882
    สิ่งที่เกี่ยวข้อง
    • ออกเเบบโดยอิตาลี
    • ผลิตโดยอิตาลี
    • น้ำหนัก (กิโลกรัม)148
    การจำแนกประเภท
    • หมวดหมู่ BIMobjectงานระบบ (HVAC) - บอยเลอร์
    • IFC classificationBoiler
    • OmniClass Number23-33 11 00
    • OmniClass TitleCommercial Boilers

    พื้นที่การขาย

    ยุโรป
    กรีซ
    เกาะไอล์ออฟแมน
    เกิร์นซีย์
    โครเอเชีย
    เจอร์ซีย์
    เช็กเกีย
    ซานมาริโน
    เซอร์เบีย
    ไซปรัส
    เดนมาร์ก
    นครรัฐวาติกัน
    นอร์เวย์
    เนเธอร์แลนด์
    บอสเนียและเฮอร์เซโกวีนา
    บัลแกเรีย
    บาร์เบโดส
    เบลเยียม
    โปรตุเกส
    โปแลนด์
    ฝรั่งเศส
    ฟินแลนด์
    มอนเตเนโกร
    มอลโดวา
    มอลตา
    มาซิโดเนียเหนือ
    โมนาโก
    ยิบรอลตาร์
    ยูเครน
    เยอรมนี
    รัสเซีย
    โรมาเนีย
    ลักเซมเบิร์ก
    ลัตเวีย
    ลิกเตนสไตน์
    ลิทัวเนีย
    สเปน
    สฟาลบาร์และยานไมเอน
    สโลวาเกีย
    สโลวีเนีย
    สวิตเซอร์แลนด์
    สวีเดน
    สหราชอาณาจักร
    หมู่เกาะแฟโร
    หมู่เกาะโอลันด์
    ออสเตรีย
    อันดอร์รา
    อิตาลี
    เอสโตเนีย
    แอลเบเนีย
    ไอซ์แลนด์
    ไอร์แลนด์
    ฮังการี

    สินค้าใกล้เคียง

    Common.Footer.ValueProp.Image.AltText

    แอปออกแบบสำหรับ Revit

    ดาวน์โหลด Design App.Common.Title

    รับพื้นที่เพื่อเข้าถึงวัตถุใหม่ๆ ได้ง่ายขึ้น จัดเก็บ Revit families ของคุณ และทำงานร่วมกับทีมของคุณ

    • เครื่องหมายถูกทำงานโดยตรงกับวัตถุ BIM ข้าง Revit
    • เครื่องหมายถูก พื้นที่จัดเก็บข้อมูลบนคลาวด์ 2GB - จัดเก็บเนื้อหา Revit ของคุณ
    • เครื่องหมายถูก รับ LCA คาร์บอนในตัว (A1-A3) โดยตรงจาก Revit