เผยแพร่สินค้าของคุณ
Hybrid kitchen fitting F5LME001
Hybrid kitchen fitting F5LME001
    KWC Group Management AG

    Hybrid kitchen fitting F5LME001

    F5LME hybrid kitchen fitting DN 15 as pillar mixer with swivelling spout, can be locked in the centre position. Adjustable swivel ranges of 50°, 120° and 360°. For connection to hot water and cold water via hoses with strainers. Single lever mixer with mixer cartridge with ceramic disc technology and adjustable, turn-proof temperature stop. Alternative activation using hand reflection via an opto-electronic sensor for time-controlled water release with preset mixing water temperature. Mixer cartridge, solenoid valve and sensor with control electronics in all-metal housing, brushed stainless steel. Laminar jet controller with integrated flow rate controller (8.0 l/min). Projection 220 mm. Activated water hygiene flushing 24 hours after last activation, safety switch-off for continuous reflection and saving of statistical data. With option for parametrisation and communication via optional, bidirectional remote control. Optionally for battery operation with battery compartment including 6 V lithium battery (CR-P2) per fitting for installation under the kitchen sink or for separate power supply via 6.75 V/12 V DC power supply unit or AQUA 3000 open system accessories. Battery compartment including battery or power supply unit with extension cable must be ordered separately.
    สเปคสินค้า
    • Depressurised no
      With filter yes
      Functional principle manual
      Hygiene flushing prepared
      Diameter nominal DN 15
      Locking mechanism Top section, non-ceramic
      Material fitting stainless steel
      Minimum flow pressure 1 bar
      Type of mixing yes
      Pop-up waste set no
      With rosettes/cover plate no
      Spout rotating, top
      Spout projection 220 mm
      Surface finish fitting brushed
      Temperature limit yes
      Thermal disinfection yes
      Type of mounting tap hole
      Type of operation manual operation
      Type of tap pillar tap
      Volume flow rate at 3 bar 0.13 l/s
      Water connection hose (gland nut)
      Accent colour none
      Power supply connection 6,75 / 12 V DC / A3000 open
      Power consumption 1.5 Voltampere
      Protective system IP 59K
    สเปคสินค้าด้านเทคนิค
    • Unique ref.2030061048
    • Product familyTaps
    • กลุ่มผลิตภัณฑ์Manual taps
    • ประเภทวัตถุ (วัตถุชิ้นเดียว)
    • วันที่เผยเเพร่2024-09-10
    • หมายเลขฉบับ1
    • สูง (มิลลิเมตร)392
    สิ่งที่เกี่ยวข้อง
    • วัสดุหลักStainless steel
    • ออกเเบบโดยเยอรมนี
    • ผลิตโดยเยอรมนี
    • น้ำหนัก (กิโลกรัม)3.35
    การจำแนกประเภท
    • หมวดหมู่ BIMobjectห้องครัว - ก๊อกน้ำเย็นและก๊อกผสม
    • Uniclass 2015 CodePr_40_20_87_84
    • Uniclass 2015 DescriptionSink taps

    พื้นที่การขาย

    เอเชีย ยุโรป โอเชียเนีย อเมริกาเหนือ แอฟริกา
    สหรัฐอาหรับเอมิเรตส์
    โครเอเชีย
    ออสเตรเลีย
    แคนาดา
    แอฟริกาใต้
    เช็กเกีย
    สหรัฐอเมริกา
    เซอร์เบีย
    เนเธอร์แลนด์
    เบลเยียม
    โปแลนด์
    ฝรั่งเศส
    ฟินแลนด์
    ยูเครน
    เยอรมนี
    รัสเซีย
    โรมาเนีย
    ลักเซมเบิร์ก
    ลัตเวีย
    ลิทัวเนีย
    สเปน
    สโลวาเกีย
    สโลวีเนีย
    สวิตเซอร์แลนด์
    สวีเดน
    สหราชอาณาจักร
    ออสเตรีย
    อิตาลี
    เอสโตเนีย
    ไอร์แลนด์
    ฮังการี
    Common.Footer.ValueProp.Image.AltText

    แอปออกแบบสำหรับ Revit

    ดาวน์โหลด Design App.Common.Title

    รับพื้นที่เพื่อเข้าถึงวัตถุใหม่ๆ ได้ง่ายขึ้น จัดเก็บ Revit families ของคุณ และทำงานร่วมกับทีมของคุณ

    • เครื่องหมายถูกทำงานโดยตรงกับวัตถุ BIM ข้าง Revit
    • เครื่องหมายถูก พื้นที่จัดเก็บข้อมูลบนคลาวด์ 2GB - จัดเก็บเนื้อหา Revit ของคุณ
    • เครื่องหมายถูก รับ LCA คาร์บอนในตัว (A1-A3) โดยตรงจาก Revit