Stainless Steel Slide | Playground Equipment | Slide

Technical information

Part of our range of stainless steel slides, available in various designs depending on the fall height.

Stainless steel slide
Slide made of stainless steel, glass bead blasted. Handrail tube Ø 42 mm, thickness 2 mm. Height of sides 16 or 20 cm. Attached at the top and bottom with mounting plates.

One-piece construction
Total construction of the slide made of 2 mm stainless steel, drawn in box form, surface glass bead blasted, without welding seam between sliding surface and side cheek.

Height of sides 15 cm from a fall height of 1.00 m. Versions with side thickness 2 mm / sliding surface thickness 2.5 mm or side thickness 2.5 mm / sliding surface thickness 2 mm are available. Available with higher sides for fall height of more than 2.00 m.

Dimensions (see sketches)
(small deviations possible; weight depending on version approx. 48 - 180 kg)

Installation information

Surfacing requirements
Depending on the installation height; embankment slides depending on the topographic situation. In the run-out area we recommend material such as sand.

Foundations

Slides with ground anchor do not need concrete foundations; all other slides 1 item 30 x 70 x 30 cm, excavation depth 70 cm.

Note on installation
Avoid orientation of the slide to the south (heating up of material).

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.