InsulBase Polyiso Insulation

InsulBase is a rigid-roof insulation panel composed of a closed-cell polyisocyanurate foam core bonded on each side to glass-reinforced felt (GRF). ReadyFlash® Technology is a standard feature of InsulBase Polyiso that allows the contractor to manipulate flash-off times by choosing which side of the insulation board to apply membrane adhesives. ReadyFlash features a dark glass-reinforced felt (GRF) on one side of the insulation board and a light glass-reinforced felt on the other.

Increases surface temperature of the dark facer up to 25ºF above ambient temperature and provides up to 30% faster adhesive flash-off.
Decreases surface temperature of the light facer up to 5ºF below ambient temperature.

Features and Benefits

InsulBase polyiso insulation provides the highest R-value per inch of commercially available insulation products
Zero ozone-depleting components, HFC- and HCFC-free formulation
Approved for direct application to steel decks

Özellikler

Panel Characteristics
- Available in 4' x 4' (1220 mm x 1220 mm) and 4' x 8' (1220 mm x 2440 mm) panels in thickness of ½" (13 mm) to 4.5" (115 mm)
- Available in 4' x 12' (1220 mm x 3660 mm) panels in the following thickness: 1.5", 1.75", 2.0", 2.2", 2.5", 2.6", 3.0", 3.3", and 3.5"Applications
- Single-Ply Roof Systems (Ballasted, Mechanically Attached, Fully Adhered)
Codes and Compliances
- ASTM C1289, Type II, Class 1, Grade 2 (20 psi), Grade 3 (25 psi)
- International Building Code (IBC) Section 2603»UL Standard 790, 263 and 1256: Component of Class A Roof Systems (refer to UL Roof Materials’ system directory)
- FM Standards 4450/4470: Class 1 approval for steel roof-deck constructions (refer to FM RoofNavSM)»California Code of Regulations, Title 24, Insulation Quality Standard License #TI-1418
- Third-party certification with the PIMA Quality Mark for Long-Term Thermal Resistance (LTTR) values
- CAN/ULC S704, Type 2, Class 3 (20PSI), Type 3, Class 3 (25PSI)
- Florida Building Code Approval»CDPH compliant for maximum allowable concentrations of target VOCs
Carlisle SynTec Systems’ focus has always been innovation – Innovation to solve problems, improve performance, reduce labor, and above all, improve sustainability. Carlisle is committed to driving sustainable and efficient processes in the design and manufacturing of our products.
- Zero ozone-depleting components, HFC- and HCFC-free formulation»CDPH Compliant for maximum allowable concentrations of target VOCs
- Up to 56.9% recycled content by weight (36.6% post-consumer/20.3% pre-consumer)
- Contributes to LEED® and Green Globes certification requirements
- End-of-life jobsite disposal options available for re-use/re-purposing
- Carlisle Polyiso Roof Insulation and HD Cover Board EPDs available
- PIMA Quality MarkCM Certification Program participant for Long-Term Thermal R-values (LTTR)»Highest R-value per inch providing maximum energy savings and CO2emissions avoidance
Polyiso Eco Ready (Optional)
- 5% bio-content option available (for 2.0" and 2.6" thicknesses)
- Contributes to carbon reduction initiatives via mass balance approach under ISCC PLUS compliance

Teknik özellikler

Benzersiz ref.insulbase-polyiso-insulation
Ürün ailesiRoofing-Products
Ürün grubuInsulation
TipObje (Tekil Nesne)
Yayınlanma tarihi2026-08-27
Baskı numarası1

Bağlantılar

İlgili

Ana malzemePolyisocyanorate PIR

Sınıflandırma

BIMobject kategorisiİnşaat Malzemeleri - Yalıtım
IFC sınıflandırmasıÇatı
ETIM KoduEC000406
ETIM AdıThermal insulation
Uniclass 2015 koduPr_25_31_28_65
Uniclass 2015 açıklamasıPolyisocyanurate (PIR) foam insulation
CSI MasterFormat 2014 kodu07 21 13.13
CSI MasterFormat 2014 başlığıFoam Board Insulation
OmniClass numarası23-13 25 19 11
OmniClass başlığıSlab and Board Thermal Insulation

Bölge bulunurluk durumu

Kuzey Amerika
Anguilla
Antigua ve Barbuda
Aruba
Bahamalar
Barbados
Belize
Bermuda
Birleşik Devletler
Caribbean Netherlands
Cayman Adaları
Curaçao
Dominik
Dominik Cumhuriyeti
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
İngiliz Virjin Adaları
Jamaika
Kanada
Kostarika
Küba
Martinique
Meksika
Montserrat
Nikaragua
Panama
Porto Riko
Saint Barthélemy
Saint Kitts ve Nevis
Saint Lucia
Saint Martin
Saint Pierre ve Miquelon
Saint Vincent ve Grenadines
Sint Maarten
Trinidad ve Tobago
Turks ve Caicos Adaları
Virjin Adaları