Publiko produktet
Archer® 72" x 36" alcove Heated BubbleMassage™ air bath and whirlpool, right drain
Archer® 72" x 36" alcove Heated BubbleMassage™ air bath and whirlpool, right drain
Archer® 72" x 36" alcove Heated BubbleMassage™ air bath and whirlpool, right drain
Archer® 72" x 36" alcove Heated BubbleMassage™ air bath and whirlpool, right drain
Archer® 72" x 36" alcove Heated BubbleMassage™ air bath and whirlpool, right drain
Archer® 72" x 36" alcove Heated BubbleMassage™ air bath and whirlpool, right drain
Archer® 72" x 36" alcove Heated BubbleMassage™ air bath and whirlpool, right drain
    Kohler

    Archer® 72" x 36" alcove Heated BubbleMassage™ air bath and whirlpool, right drain

    This Archer® bath offers both a relaxing whirlpool hydromassage and a soothing Heated BubbleMassage™, with each experience controlled independently. Whirlpool jets relax away the day's tension as you surround your body in a cushion of heated massaging bubbles. With Heated BubbleMassage™ hydrotherapy, airjets release thousands of heated bubbles that deliver a blissfully warm, invigorating full-body massage. This bath has a low step-over height while allowing deep, comfortable soaking.

    Features

    • 118 airjets release thousands of heated bubbles that surround and support the body in a warm massage
    • Automatic and manual purge cycles remove residual water from air channels after use
    • Variable-speed blower lets you adjust Heated BubbleMassage™ massage intensity to 18 levels
    • Single-speed whirlpool revitalizes sore muscles
    • 8 fully adjustable whirlpool jets allow users to customize hydromassage flow and direction at each jet
    • Comfort Depth® design offers a convenient 19" step-over height while retaining the same depth as a standard 21" bath
    • Integral lumbar support
    • Slotted overflow allows for deep soaking
    • Integral apron
    • Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
    • Textured bottom surface
    • Coordinates with other products in the Archer collection
    • Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath

    Technology

    • Auto-shutoff timer on blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off
    • User interface: electronic keypad control for Heated BubbleMassage™; air switch actuator for whirlpool

    Hydrotherapy

    • Whirlpool

    Material

    • Acrylic

    Installation

    • Right drain
    • Alcove
    • Whirlpool pump: 120V electrical requirement
    • Blower: 120V electrical requirement
    • BubbleMassage™ heater: 120V electrical requirement
    • Requires three dedicated circuits
    • Remote blower motor installation required (relocation kit is included)

    Kohler ile iletişime geçin

    Teknik özellikler
    • Benzersiz ref.Kohler-K-1124-XGHRA
    • Ürün ailesiBathtubs
    • Ürün grubuArcher®
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2023-07-04
    • Baskı numarası1
    • Yükseklik (inç)20.25
    • Genişlik (inç)36
    • Derinlik (inç)72
    İlgili
    • Ana malzemeAkrilik
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiHijyenik - Banyo ve Spalar
    • ETIM KoduEC011609
    • ETIM AdıBath
    • Uniclass 2015 koduPr_40_20_06_08
    • Uniclass 2015 açıklamasıBaths
    • CSI MasterFormat 2014 kodu22 41 19
    • CSI MasterFormat 2014 başlığıResidential Bathtubs
    • OmniClass numarası23-31 15 00
    • OmniClass başlığıBathtubs

    Bölge bulunurluk durumu

    Kuzey Amerika
    Birleşik Devletler
    Kanada
    Meksika
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin