Publiko produktet
GRAFIK Eye® - GRX-IRPS-WH Infrared Transmitter/Receiver Pair

GRAFIK Eye® - GRX-IRPS-WH Infrared Transmitter/Receiver Pair

Description

Infrared transmitter/receiver pair automatically coordinates lighting preset functions in areas with partitions (example: partitioned meeting rooms and ballrooms). Sensors may be used with any GRAFIK Eye 3000 or 4000 systems as well as GRAFIK Eye Centralized Lighting Control Systems.
  • Automatically combines lighting preset functions when partition is open creating one large space.
  • Lighting preset functions become independent as partition is closed creating several smaller spaces.
Sensors require additional Lutron interface (GRX-AV or OMX-AV) and power supply (GRX-12VDC) for proper operation.

Important Notes
  1. Read all instructions carefully before starting installation.
  2. This device must be installed by a qualified electrician.
  3. Install in accordance with the National Electric Code® and all applicable local regulations.
  4. Turn power OFF at the control panel before installing the device. Do not connect high-voltage power to low voltage terminals. Improper wiring can result in personal injury or damage to the device or to other equipment.
Specifications
  • Operating voltage: Low-voltage Class 2 (PELV) 12 V~ from GRX-12VDC plug-in power supply (ordered separately). One GRX-12VDC can supply power to five sensor transmitter/receiver pairs.
  • Transmitter and receiver have reverse polarity and short-circuit protection.
  • Receiver includes an LED indicator that assists in sensor alignment during installation and sensor operating status.
  • Each GRX-AV or OMX-AV interface (ordered separately) can accommodate up to five transmitter/receiver pairs for five different moveable walls.
  • 32-104°F (0 - 40°C). Relative humidity less than 90% non-condensing.
  • Surface mount indoors only

Lutron Electronics ile iletişime geçin

Özellikler
  • Dimming / Dimmer Yes
    Type Infrared | Lights On/Off | Dimming
    Environment Indoor
    Amp Rating 0 amps to 1 amps
    Depth 1.5"
    Height 2.5"
    Voltage 24 V
    Width 4.75"

Teknik özellikler
  • Benzersiz ref.lutron-grafik-sensor
  • Ürün ailesiPresence Detection/Registration
  • Ürün grubuGRAFIK Systems®
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2019-11-27
  • Baskı numarası2
  • Yükseklik (inç)2.5
  • Genişlik (inç)4.75
  • Derinlik (inç)1.5
İlgili
  • Ana malzemePlastik
  • Tasarım yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiElektronikler - İletişim
  • CSI MasterFormat 2014 kodu26 09 23
  • CSI MasterFormat 2014 başlığıLighting Control Devices
  • OmniClass numarası23-35 00 00
  • OmniClass başlığıElectrical and Lighting Specific Products and Equipment

Bölge bulunurluk durumu

Kuzey Amerika
Birleşik Devletler
Kanada
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin